|
TIL302 Datasheet, PDF (3/7 Pages) Texas Instruments – NUMERIC DISGPLAYS | |||
|
◁ |
Ä
TIL302, TIL303, TIL304
NUMERIC DISPLAYS
Ä
SOES010A, APRIL 1971 â REVISED DECEMBER 1993
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Reverse voltage at 25°C free-air temperature: Each segment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 V
Decimal point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 V
Peak forward current, each segment or decimal point (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mA
Continuous forward current: Each segment or decimal point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Total for TIL302, TIL303 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 mA
Total for TIL304 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 mA
Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . â25°C to 85°C
NOTE 1: This value applies for PRR ⥠60 Hz, duty cycle ⤠10%.
operating characteristics of each segment at 25°C free-air temperature (unless otherwise noted)
PARAMETER
Iv
Luminous intensity (see Note 2)
λp
Wavelength at peak emission
âλ Spectral bandwidth
VF Static forward voltage
αVF Average temperature coefficient of static forward voltage
IR
Static reverse current
C
Anode-to-cathode capacitance
TEST CONDITIONS
IF = 20 mA
IF = 20 mA,
TA = 0°C to 70°C
VR = 6 V
VR = 0, f = 1 MHz
MIN TYP MAX UNIT
100 275
µcd
660
nm
20
nm
3 3.4 3.8 V
â 2.7
mV/°C
100 µA
85
pF
operating characteristics of decimal point at 25°C free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS MIN TYP MAX UNIT
Iv
Luminous intensity (see Note 2)
λp
Wavelength at peak emission
âλ Spectral bandwidth
IF = 20 mA
40 110
µcd
660
nm
20
nm
VF Static forward voltage
1.5 1.65
2V
αVF Average temperature coefficient of static forward voltage
IF = 20 mA,
TA = 0°C to 70°C
â1.4
mV/°C
IR
Static reverse current
VR = 3 V
100 µA
C
Anode-to-cathode capacitance
VR = 0, f = 1 MHz
120
pF
NOTE 2: Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on
Illumination) eye-response curve.
⢠POST OFFICE BOX 655303 DALLAS, TEXAS 75265
⢠POST OFFICE BOX 1443 HOUSTON, TEXAS 77001
3
|
▷ |