THS4513_13 Datasheet, PDF (3/41 Pages) Texas Instruments – WIDEBAND, LOW-NOISE, LOW-DISTORTION,FULLY-DIFFERENTIAL AMPLIFIER

THS4513
www.ti.com
SLOS472E – AUGUST 2005 – REVISED JANUARY 2013
ELECTRICAL CHARACTERISTICS: V_S+ – V_S– = 5 V
Test conditions at V_S+ = 2.5 V, V_S– = –2.5 V, G = 0 dB, CM = open, V_O = 2 V_PP, R_F = 348 Ω, R_L = 200-Ω differential,
T_A = +25°C, single-ended input, differential output, and input and output referenced to midsupply, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
TEST
LEVEL ⁽¹⁾
AC PERFORMANCE
Small-signal bandwidth
Gain-bandwidth product
G = 0 dB, V_O = 100 mV_PP
G = 6 dB, V_O = 100 mV_PP
G = 6 dB
1.6
GHz
1.4
GHz
2.8
GHz
Bandwidth for 0-dB flatness
Large-signal bandwidth
Slew rate (differential)
G = 0 dB, V_O = 2 V_PP
G = 6 dB, V_O = 2 V_PP
G = 0 dB, V_O = 2 V_PP
150
700
1.4
5100
MHz
GHz
V/μs
Rise time fall time
Settling time to 1%
2-V step
0.5
0.5
ns
2.9
Settling time to 0.1%
16
f = 10 MHz
–110
2nd-order harmonic distortion
f = 50 MHz
–80
dBc
f = 100 MHz
–66
3rd-order harmonic distortion
f = 10 MHz
f = 50 MHz
–108
–94
C
dBc
f = 100 MHz
–81
2nd-order intermodulation distortion
3rd-order intermodulation distortion
2nd-order output intercept point
3rd-order output intercept point
1-dB compression point
Noise figure
V_O = 2 V_PP envelope,
200-kHz tone spacing,
R_L = 100 Ω
f_C = 70 MHz
f_C = 140 MHz
f_C = 70 MHz
f_C = 140 MHz
f_C = 70 MHz
200-kHz tone spacing
R_L = 100 Ω
f_C = 140 MHz
f_C = 70 MHz
f_C = 140 MHz
f_C = 70 MHz
f_C = 140 MHz
50-Ω system, 10 MHz, G = 6 dB
–78
–55
dBc
–88
–72
77
53
dBm
42
34
12.2
dBm
10.8
19.8
dB
Input voltage noise
f > 10 MHz
2.2
nV/√Hz
Input current noise
f > 10 MHz
1.7
pA/√Hz
DC PERFORMANCE
Open-loop voltage gain (A_OL)
Input offset voltage
Average offset voltage drift
Input bias current
Average bias current drift
Input offset current
Average offset current drift
T_A = +25°C
T_A = –40°C to +85°C
T_A = –40°C to +85°C
T_A = +25°C
T_A = –40°C to +85°C
T_A = –40°C to +85°C
T_A = +25°C
T_A = –40°C to +85°C
T_A = –40°C to +85°C
63
dB
C
1
4
mV
A
1
5
mV
2.6
μV/°C
B
8
15.5
μA
A
8
18.5
20
nA/°C
B
1.6
3.6
μA
A
1.6
7
4
nA/°C
B
(1) Test levels: (A) 100% tested at +25°C. Over-temperature limits by characterization and simulation. (B) Limits set by characterization and
simulation. (C) Typical value only for information.
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: THS4513
Submit Documentation Feedback
3