SN75372PSR Datasheet, PDF (3/19 Pages) Texas Instruments – DUAL MOSFET DRIVER

ą
SN75372
DUAL MOSFET DRIVER
ą
SLLS025A − JULY 1986
electrical characteristics over recommended ranges of V_CC1, V_CC2, and operating free-air
temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP†
MAX UNIT
VIK
VOH
VOL
VF
II
Input clamp voltage
High-level output voltage
Low-level output voltage
Output clamp-diode forward voltage
Input current at maximum input
voltage
II = − 12 mA
VIL = 0.8 V,
VIL = 0.8 V,
VIH = 2 V,
VCC2 = 15 V to 24 V,
IOL = 40 mA
VI = 0,
VI = 5.5 V
−1.5 V
IOH = − 50 µA VCC2 −1.3 VCC2 −0.8
V
IOH = − 10 mA VCC2 −2.5 VCC2 −1.8
IOL = 10 mA
0.15
0.3
VIH = 2 V,
V
0.25
0.5
IF = 20 mA
1.5 V
1 mA
IIH
High-level input current
Any A
Any E ^{VI = 2.4 V}
40
µA
80
IIL
Low-level input current
Any A
Any E ^{VI = 0.4 V}
−1 −1.6
mA
−2 −3.2
ICC1(H)
Supply current from VCC1, both
outputs high
ICC2(H)
Supply current from VCC2, both
outputs high
VCC1 = 5.25 V,
All inputs at 0 V,
VCC2 = 24 V,
No load
2
4 mA
0.5 mA
ICC1(L)
ICC2(L)
Supply current from VCC1, both
outputs low
Supply current from VCC2, both
outputs low
VCC1 = 5.25 V,
All inputs at 5 V,
VCC2 = 24 V,
No load
16
24 mA
7
13 mA
ICC2(S)
Supply current from VCC2, standby
condition
VCC1 = 0,
All inputs at 5 V,
† _{All typical values are at VCC1 = 5 V, VCC2 = 20 V, and TA = 25°C.}
VCC2 = 24 V,
No load
0.5 mA
switching characteristics, V_CC1 = 5 V, V_CC2 = 20 V, T_A = 25°C
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
tDLH Delay time, low-to-high-level output
20
35 ns
tDHL Delay time, high-to-low-level output
10
20 ns
tTLH
tTHL
Transition time, low-to-high-level output
Transition time, high-to-low-level output
CL = 390 pF, RD = 10 Ω, See Figure 1
20
30 ns
20
30 ns
tPLH Propagation delay time, low-to-high-level output
10
40
65 ns
tPHL Propagation delay time, high-to-low-level output
10
30
50 ns
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
3−3