SN74AVC4T234 Datasheet, PDF (3/12 Pages) Texas Instruments – 4-BIT DUAL-SUPPLY NON-INVERTING BUS TRANSLATOR

SN74AVC4T234
www.ti.com
SCES810A – JUNE 2011 – REVISED JUNE 2011
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
over operating free-air temperature range (unless otherwise noted)
MIN
MAX UNIT
V_CCA
V_CCB
Supply voltage range
V_I Input voltage range⁽²⁾
Output ports (A port)
Input ports (B port)
–0.5
4.6 V
–0.5
4.6
V
–0.5
4.6
V_O
Voltage range applied to any output in the high-impedance or
power-off state⁽²⁾
V_O Voltage range applied to any output in the high or low state^{(2) (3)}
I_IK Input clamp current
I_OK Output clamp current
I_O Continuous output current
Continuous current through V_CCA, V_CCB, or GND
θ_JA Package thermal impedance⁽⁴⁾
T_stg Storage temperature range
A port
A port
V_I < 0
V_O < 0
–0.5
4.6
–0.5
–65
V_CCA + 0.5
–50
–50
±20
±50
180.4
150
V
V
mA
mA
mA
mA
ºC/W
°C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input voltage and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The output positive-voltage rating may be exceeded up to 4.6 V maximum if the output current rating is observed.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
Copyright © 2011, Texas Instruments Incorporated
3