SLUU633A Datasheet, PDF (3/13 Pages) Texas Instruments – 2-A to 6-A Integrated Power Solution

www.ti.com
Getting Started
3 Getting Started
Figure 1 highlights the user interface items associated with the EVM. The polarized V_IN Power terminal
block is used for connection to the host input supply and the polarized V_OUT Power terminal block is used
for connection to the load. The terminal blocks can except up to 16 AWG wire.
The V_IN monitor and V_OUT monitor test points located near the power terminal blocks are intended to be
used as voltage monitoring points where voltmeters can be connected to measure V_IN and V_OUT. The
voltmeter references should be connected to any of the four V_IN/V_OUT monitor grounds test points located
between the power terminal blocks. Do not use these V_IN and V_OUT monitoring test points as the input
supply or output load connection points. The PCB traces connecting to these test points are not designed
to support high currents.
Figure 1. TPS84x10EVM-00x User Interface
SLUU633A – September 2011 – Revised February 2012 TPS84410EVM-001/TPS84210EVM-002/TPS84610EVM-003, 2-A to 6-A
3
Submit Documentation Feedback
Integrated Power Solution
Copyright © 2011–2012, Texas Instruments Incorporated