MSP430G2X52_14 Datasheet, PDF (3/64 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430G2x52
MSP430G2x12
www.ti.com
DEVICE PINOUTS
SLAS722G – DECEMBER 2010 – REVISED MAY 2013
PW PACKAGE
(TOP VIEW)
DVCC 1
P1.0/TA0CLK/ACLK/A0/CA0 2
P1.1/TA0.0/A1/CA1 ³
P1.2/TA0.1/A2/CA2 ⁴
P1.3/ADC10CLK/CAOUT/A3/VREF-/VEREF-/CA3 ⁵
P1.4/TA0.2/SMCLK/A4/VREF+/VEREF+/CA4/TCK ⁶
P1.5/TA0.0/SCLK/A5/CA5/TMS 7
14 DVSS
13 XIN/P2.6/TA0.1
12 XOUT/P2.7
11 TEST/SBWTCK
10 RST/NMI/SBWTDIO
9 P1.7/SDI/SDA/CAOUT/A7/CA7/TDO/TDI
8 P1.6/TA0.1/SDO/SCL/A6/CA6/TDI/TCLK
NOTE: ADC10 pin functions are available only on MSP430G2x52.
NOTE: The pulldown resistors of port pins P2.0, P2.1, P2.2, P2.3, P2.4, and P2.5 should be enabled by setting P2REN.x = 1.
RSA PACKAGE
(TOP VIEW)
P1.0/TA0CLK/ACLK/A0/CA0
P1.1/TA0.0/A1/CA1
P1.2/TA0.1/A2/CA2
P1.3/ADC10CLK/CAOUT/A3/VREF-/VEREF-/CA3
16 15 14 13
1
12
2
11
3
10
4
9
5678
XIN/P2.6/TA0.1
XOUT/P2.7
TEST/SBWTCK
RST/NMI/SBWTDIO
NOTE: ADC10 pin functions are available only on MSP430G2x52.
NOTE: The pulldown resistors of port pins P2.0, P2.1, P2.2, P2.3, P2.4, and P2.5 should be enabled by setting P2REN.x = 1.
N OR PW PACKAGE
(TOP VIEW)
DVCC 1
P1.0/TA0CLK/ACLK/A0/CA0 2
P1.1/TA0.0/A1/CA1 3
P1.2/TA0.1/A2/CA2 4
P1.3/ADC10CLK/CAOUT/VREF-/VEREF-/A3/CA3 5
P1.4/TA0.2/SMCLK/A4/VREF+/VEREF+/CA4/TCK 6
P1.5/TA0.0/SCLK/A5/CA5/TMS 7
P2.0 8
P2.1 9
P2.2 10
20 DVSS
19 XIN/P2.6/TA0.1
18 XOUT/P2.7
17 TEST/SBWTCK
16 RST/NMI/SBWTDIO
15 P1.7/SDI/SDA/CAOUT/A7/CA7/TDO/TDI
14 P1.6/TA0.1/SDO/SCL/A6/CA6/TDI/TCLK
13 P2.5
12 P2.4
11 P2.3
NOTE: ADC10 pin functions are available only on MSP430G2x52.
Copyright © 2010–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3