LP3892EMRX-12 Datasheet, PDF (3/18 Pages) Texas Instruments – LP3892 1.5A Fast-Response Ultra Low Dropout Linear Regulators

LP3892
www.ti.com
SNVS236D – SEPTEMBER 2003 – REVISED APRIL 2013
ABSOLUTE MAXIMUM RATINGS ⁽¹⁾
Storage Temperature Range
Lead Temp. (Soldering, 5 seconds)
ESD Rating
Human Body Model ⁽²⁾
Machine Model ⁽³⁾
Power Dissipation ⁽⁴⁾
V_IN Supply Voltage (Survival)
V_BIAS Supply Voltage (Survival)
Shutdown Input Voltage (Survival)
I_OUT (Survival)
Output Voltage (Survival)
Junction Temperature
VALUE / UNITS
−65°C to +150°C
260°C
2 kV
200V
Internally Limited
−0.3V to +6V
−0.3V to +7V
−0.3V to +7V
Internally Limited
−0.3V to +6V
−40°C to +150°C
(1) Absolute maximum ratings indicate limits beyond which damage to the component may occur. Operating ratings indicate conditions for
which the device is intended to be functional, but do not ensure specific performance limits. For specifications, see Electrical
Characteristics. Specifications do not apply when operating the device outside of its rated operating conditions.
(2) The human body model is a 100 pF capacitor discharged through a 1.5k resistor into each pin.
(3) The machine model is a 220 pF capacitor discharged directly into each pin. The machine model ESD rating of pin 5 is 100V.
(4) At elevated temperatures, device power dissipation must be derated based on package thermal resistance and heatsink thermal values.
θ_J-A for TO-220 devices is 65°C/W if no heatsink is used. If the TO-220 device is attached to a heatsink, a θ_J-S value of 4°C/W can be
assumed. θ_J-A for DDPAK/TO-263 devices is approximately 40°C/W if soldered down to a copper plane which is at least 1.5 square
inches in area. θ_J-A value for typical SO PowerPAD-8 PC board mounting is 166°C/W. If power dissipation causes the junction
temperature to exceed specified limits, the device will go into thermal shutdown.
RECOMMENDED OPERATING CONDITIONS
V_IN
Shutdown
I_OUT
Junction Temperature
V_BIAS
VALUE / UNITS
(V_OUT + V_DO) to 5.5V
0 to +6V
1.5A
−40°C to +125°C
4.5V to 6V
Copyright © 2003–2013, Texas Instruments Incorporated
Product Folder Links: LP3892
Submit Documentation Feedback
3