English
Language : 

LMH6715_16 Datasheet, PDF (3/21 Pages) Texas Instruments – Dual Wideband Video Op Amp
LMH6715
www.ti.com
SNOSA10C – MAY 2002 – REVISED APRIL 2013
Electrical Characteristics(1)
AV = +2, RF = 500Ω, VCC = ±5 V, RL = 100Ω; unless otherwise specified. Boldface limits apply at the temperature extremes.
Symbol
Parameter
Conditions
Min
Typ
Max
Units
Frequency Domain Response
SSBW
-3dB Bandwidth
LSBW
-3dB Bandwidth
Gain Flatness
GFP
Peaking
GFR
Rolloff
LPD
Linear Phase Deviation
DG
Differential Gain
DP
Differential Phase
Time Domain Response
VOUT < 0.5VPP, RF = 300Ω
VOUT < 4.0VPP, RF = 300Ω
VOUT < 0.5VPP
DC to 100MHz, RF = 300Ω
DC to 100MHz, RF = 300Ω
DC to 100MHz, RF = 300Ω
RL = 150Ω, 4.43MHz
RL = 150Ω, 4.43MHz
280
400
170
0.1
0.1
0.25
0.02
0.02
MHz
MHz
dB
dB
deg
%
deg
Tr
Rise and Fall Time
0.5V Step
1.4
ns
4V Step
3
ns
Ts
Settling Time to 0.05%
2V Step
12
ns
OS
Overshoot
0.5V Step
1
%
SR
Slew Rate
2V Step
1300
V/μs
Distortion And Noise Response
HD2
HD3
2nd Harmonic Distortion
3rd Harmonic Distortion
Equivalent Input Noise
2VPP, 20MHz
2VPP, 20MHz
−60
dBc
−75
dBc
VN
IN
INN
SNF
XTLKA
Non-Inverting Voltage
Inverting Current
Non-Inverting Current
Noise Floor
Crosstalk
>1MHz
>1MHz
>1MHz
>1MHz
Input Referred 10MHz
3.4
10.0
1.4
−153
−70
nV/√Hz
pA/√Hz
pA/√Hz
dB1Hz
dB
Static, DC Performance
VIO
Input Offset Voltage
±2
±6
mV
±8
DVIO
IBN
Average Drift
Input Bias Current
Non-Inverting
±30
μV/°C
±5
±12
μA
±20
DIBN
IBI
Average Drift
Input Bias Current
Inverting
±30
nA/°C
±6
±21
μA
±35
DIBI
Average Drift
PSRR
Power Supply Rejection Ratio
DC
±20
46
60
44
nA/°C
dB
CMRR
Common Mode Rejection Ratio
DC
50
56
dB
47
ICC
Supply Current per Amplifier
RL = ∞
4.7
5.8
7.6
mA
4.1
8.1
Miscellaneous Performance
RIN
CIN
ROUT
Input Resistance
Input Capacitance
Output Resistance
Non-Inverting
Non-Inverting
Closed Loop
1000
kΩ
1.0
pF
.06
Ω
(1) Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very
limited self-heating of the device such that TJ = TA. No specification of parametric performance is indicated in the electrical tables under
conditions of internal self heating where TJ > TA. See Application Section for information on temperature de-rating of this device."
Min/Max ratings are based on product characterization and simulation. Individual parameters are tested as noted.
Copyright © 2002–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: LMH6715