|
LM385LPE3-2-5 Datasheet, PDF (3/18 Pages) Texas Instruments – MICROPOWER VOLTAGE REFERENCES | |||
|
◁ |
LM285Ä2.5, LM385Ä2.5, LM385BÄ2.5
MICROPOWER VOLTAGE REFERENCES
SLVS023J â JANUARY 1989 â REVISED MARCH 2005
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)â
Reverse current, IR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Forward current, IF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA
Package thermal impedance, θJA (see Notes 1 and 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97°C/W
LP package . . . . . . . . . . . . . . . . . . . . . . . . . . 140°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . 149°C/W
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . â65°C to 150°C
â Stresses beyond those listed under âabsolute maximum ratingsâ may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under ârecommended operating conditionsâ is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) â TA)/θJA. Operation at the absolute maximum TJ of 150°C can affect reliability.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions
IZ
Reference current
TA
Operating free-air temperature range
LM285-2.5
LM385-2.5, LM385B-2.5
MIN MAX UNIT
0.02
20 mA
â40
85
°C
0
70
electrical characteristics at specified free-air temperature
PARAMETER
TEST
CONDITIONS
TAâ¡
LM285-2.5
MIN TYP MAX
LM385-2.5
MIN TYP MAX
LM385B-2.5
UNIT
MIN TYP MAX
VZ
Reference
voltage
IZ = 20 µA
to 20 mA
25°C 2.462 2.5 2.538 2.425 2.5 2.575 2.462 2.5 2.538 V
Average
αVZ
temperature
coefficient of
reference
IZ = 20 µA
to 20 mA
Full range
±20
±20
±20
ppm/°C
voltage§
Change in
IZ = 20 µA
25°C
1
2
2
âVZ
reference
voltage with
current
to 1 mA
IZ = 1 mA
to 20 mA
Full range
25°C
Full range
1.5
10
30
2
20
30
2
mV
20
30
Long-term
âVZ/ât
change in
reference
IZ = 100 µA
25°C
±20
±20
±20
ppm/khr
voltage
Minimum
IZ(min) reference
current
Full range
8
20
8
20
8
20 µA
Reference
25°C
zz
impedance
IZ = 100 µA Full range
0.2 0.6
1.5
0.4
1
1.5
0.4
1
â¦
1.5
Broadband IZ = 100 µA,
Vn
noise
f = 10 Hz
25°C
120
120
120
µV
voltage
to 10 kHz
â¡ Full range is 0°C to 70°C for the LM385-2.5 and LM385B-2.5, and â40°C to 85°C for the LM285-2.5.
§ The average temperature coefficient of reference voltage is defined as the total change in reference voltage divided by the specified temperature
range.
⢠POST OFFICE BOX 655303 DALLAS, TEXAS 75265
3
|
▷ |