LM10010 Datasheet, PDF (3/13 Pages) Texas Instruments – VID Voltage Programmer for Point of Load Regulator

Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the Texas Instruments Sales Office/
Distributors for availability and specifications.
VDD, EN, IDAC_OUT
VIDA, VIDB, VIDC, VIDS
ESD Rating (Note 2)
Human Body Model
Storage Temperature
Junction Temperature
-0.3V to 6V
-0.3V to 6V
2 kV
-65°C to +150°C
+150°C
Operating Ratings
VDD
IDAC_OUT
VIDA, VIDB, VIDC, VIDS
EN
Junction Temperature
Ambient Temperature
LLP-10 Thermal Resistance (θ_JA)
(Note 3)
3.0V to 5.5V
-0.3V to VDD-1.75V
-0.3V to 5.5V
-0.3V to 5.5V
−40°C to +125°C
−40°C to +125°C
40°C/W
Electrical Characteristics Limits in standard type are for T_J = 25°C only. Limits appearing in boldface type apply
over the full operating junction temperature range (-40°C < T_J < +125°C). Unless otherwise noted, specifications apply to the Typical
Application Circuit. See (Note 4).
Symbol
Parameter
Conditions
Supply, UVLO, and Enable
I_Q
Quiescent current
VDD=5.0V, V_EN=2.0V
VDD=5.0V, V_EN=2.0V, I_FS
UVLO
Under voltage rising threshold
VDD=5.0V, V_EN=0.0V
Under voltage falling threshold
Hysteresis
V_EN
Enable rising threshold
Enable hysteresis
I_EN
IDAC
Enable pullup current
ACC
Accuracy
Measured at full scale
LSB
Default
DAC step size
Output code
I_FS /(2⁶-1)
At startup
Output current
At startup
I_FS
Full-scale output current
INL
Integral non-linearity
VID[5:0] = 000000b
DNL
Differential non-linearity
Offset
Offset current
VID[5:0] = 111111b
V_{OUT_MAX} Output compliance
VID Logic Inputs (Note 5)
VDD-V_{IDAC_OUT}, VDD=3V
V_IL
V_IH
I_IL
I_IH
t_DEGLITCH
t₁
t₂
t₃
t₄
t₅
Input voltage low
Input voltage high
Input current low
Input current high
Input deglitch time
VIDS delay time to VID latch
VIDS rising edge
Input hold time VIDA, VIDB, VIDC valid VIDS edge
VIDS delay time to VID latch
VIDS falling edge
Input hold time VIDA, VIDB, VIDC valid VIDS edge
Delay to beginning of IDAC_OUT
transition
Measured from VIDS rising edge
t₆
IDAC_OUT transition time
Time constant for exponential rise
Min. Typ. Max. Units
250 280 µA
340
µA
45 70
µA
2.65 2.95 V
2.2 2.45
V
100 200 300 mV
1.20 1.34 1.45 V
50 100 180 mV
2
µA
2
-1
-0.25
-2
940
46d
16
59.2
0.15 1
0.06 0.25
60
1.3 1.75
%
nA
Code
µA
µA
LSB
LSB
nA
V
0.4
V
1.1
V
-5
µA
5
µA
3.4
µs
1
µs
20
µs
1
µs
20
µs
10 17
µs
40
µs
3
www.ti.com