INA103AG Datasheet, PDF (3/17 Pages) Texas Instruments – Low Noise, Low Distortion INSTRUMENTATION AMPLIFIER

SPECIFICATIONS (CONT)
All specifications at T_A = +25°C, V_S = ±15V and R_L = 2kΩ, unless otherwise noted.
PARAMETER
POWER SUPPLY
Rated Voltage
Voltage Range
Quiescent Current
TEMPERATURE RANGE
Specification
Operation
Storage
Thermal Resistance, θ_JA
CONDITIONS
INA103KP, KU
MIN
TYP
±15
±9
9
0
–40
–40
100
MAX
±25
12.5
+70
+85
+100
UNITS
V
V
mA
°C
°C
°C
°C/W
PIN CONFIGURATION
Top View
+ Input 1 ⁽¹⁾
+ Gain Sense 2
+ Offset Null 3
– Offset Null 4
+ Gain Drive 5
+R_G 6
Ref 7
V– 8
DIP or SOIC
16 – Input
15 – Gain Sense
14 G = 100
13 –R_G
12 – Gain Drive
11 Sense
10 Output
9 V+
NOTE: (1) Pin 1 Marking—SOL-16 Package
PACKAGE/ORDERING INFORMATION
PRODUCT
PACKAGE
PACKAGE
DRAWING TEMPERATURE
NUMBER⁽¹⁾
RANGE
INA103KP
INA103KU
Plastic DIP
SOL-16
180
0°C to +70°C
211
0°C to +70°C
NOTE: (1) For detailed drawing and dimension table, please see end of data
sheet, or Appendix C of Burr-Brown IC Data Book.
ELECTROSTATIC
DISCHARGE SENSITIVITY
Any integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet
published specifications.
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Power Supply Voltage ....................................................................... ±25V
Input Voltage Range, Continuous ....................................................... ±V_S
Operating Temperature Range: ........................................ –40°C to +85°C
Storage Temperature Range: ........................................... –40°C to +85°C
Junction Temperature:
P, U Package .............................................................................. +125°C
Lead Temperature (soldering, 10s) ............................................... +300°C
Output Short Circuit to Common ............................................. Continuous
NOTE: (1) Stresses above these ratings may cause permanent damage.
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change
without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant
any BURR-BROWN product for use in life support devices and/or systems.
®
3
INA103