DS90LV049_15 Datasheet, PDF (3/19 Pages) Texas Instruments – 3V LVDS Dual Line Driver with Dual Line Receiver

DS90LV049
www.ti.com
SNLS159D – NOVEMBER 2002 – REVISED APRIL 2013
ABSOLUTE MAXIMUM RATINGS⁽¹⁾⁽²⁾
Supply Voltage (V_DD)
LVCMOS Input Voltage (D_IN)
LVDS Input Voltage (R_IN+, R_IN-)
Enable Input Voltage (EN, EN)
LVCMOS Output Voltage (R_OUT)
LVDS Output Voltage (D_OUT+, D_OUT-)
LVCMOS Output Short Circuit Current (R_OUT)
LVDS Output Short Circuit Current (D_OUT+, D_OUT−)
LVDS Output Short Circuit Current Duration (D_OUT+, D_OUT−)
Storage Temperature Range
Lead Temperature Range
Soldering (4 sec.)
Maximum Junction Temperature
Maximum Package Power Dissipation @ +25°C
PW0016A Package
Derate PW0016A Package
ESD Rating
(HBM, 1.5 kΩ, 100 pF)
(MM, 0 Ω, 200 pF)
−0.3 V to +4 V
−0.3 V to (V_DD + 0.3 V)
−0.3 V to +3.9 V
−0.3 V to (V_DD + 0.3 V)
−0.3 V to (V_DD + 0.3 V)
−0.3 V to +3.9 V
100 mA
24 mA
Continuous
−65°C to +150°C
+260°C
+150°C
866 mW
6.9 mW/°C above +25°C
≥ 7 kV
≥ 250 V
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be specified. They are not meant to imply
that the devices should be operated at these limits. ELECTRICAL CHARACTERISTICS specifies conditions of device operation.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
RECOMMENDED OPERATING CONDITIONS
Min
Typ
Max
Units
Supply Voltage (V_DD)
Operating Free Air Temperature (T_A)
+3.0
+3.3
+3.6
V
−40
+25
+85
°C
ELECTRICAL CHARACTERISTICS
Over supply voltage and operating temperature ranges, unless otherwise specified.^(1)(2)(3)
Symbol
Parameter
Conditions
Pin
Min
Typ Max Units
LVCMOS Input DC Specifications (Driver Inputs, ENABLE Pins)
V_IH
Input High Voltage
V_IL
Input Low Voltage
I_IH
Input High Current
V_IN = V_DD
I_IL
Input Low Current
V_IN = GND
V_CL
Input Clamp Voltage
I_CL = −18 mA
LVDS Output DC Specifications (Driver Outputs)
2.0
V_DD
V
D_IN
GND
0.8
V
EN
−10
1
+10
μA
EN
−10 −0.1 +10
μA
−1.5 −0.6
V
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
except: V_TH, V_TL, V_OD and ΔV_OD.
(2) All typical values are given for: V_DD = +3.3 V, T_A = +25°C.
(3) The DS90LV049's drivers are current mode devices and only function within datasheet specifications when a resistive load is applied to
their outputs. The typical range of the resistor values is 90 Ω to 110 Ω.
Copyright © 2002–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: DS90LV049