74AC11373_14 Datasheet, PDF (3/11 Pages) Texas Instruments – OCTAL TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS

74AC11373
OCTAL TRANSPARENT D-TYPE LATCH
WITH 3-STATE OUTPUTS
SCAS213A − MAY 1987 − REVISED APRIL 1996
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)^†
Supply voltage range, V_CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 6 V
Input voltage range, V_I (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to V_CC + 0.5 V
Output voltage range, V_O (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to V_CC + 0.5 V
Input clamp current, I_IK (V_I < 0 or V_I > V_CC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Output clamp current, I_OK (V_O < 0 or V_O > V_CC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
Continuous output current, I_O (V_O = 0 to V_CC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
Continuous current through V_CC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±200 mA
Maximum power dissipation at T_A = 55°C (in still air) (see Note 2): DB package . . . . . . . . . . . . . . . . . . 0.65 W
DW package . . . . . . . . . . . . . . . . . . 1.7 W
NT package . . . . . . . . . . . . . . . . . . . 1.3 W
Storage temperature range, T_stg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
† _{Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and}
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The maximum package power dissipation is calculated using a junction temperature of 150_C and a board trace length of 750 mils,
except for the NT package, which has a trace length of zero.
recommended operating conditions
V_CC Supply voltage
V_IH
High-level input voltage
V_IL
Low-level input voltage
V_I
Input voltage
V_O
Output voltage
I_OH
High-level output current
I_OL
Low-level output current
Dt/Dv Input transition rise or fall rate
T_A
Operating free-air temperature
V_CC = 3 V
V_CC = 4.5 V
V_CC = 5.5 V
V_CC = 3 V
V_CC = 4.5 V
V_CC = 5.5 V
V_CC = 3 V
V_CC = 4.5 V
V_CC = 5.5 V
V_CC = 3 V
V_CC = 4.5 V
V_CC = 5.5 V
OE
Data, LE
MIN NOM MAX UNIT
3
5 5.5 V
2.1
3.15
V
3.85
0.9
1.35 V
1.65
0
V_CC
V
0
V_CC
V
−4
−24 mA
−24
12
24 mA
24
0
5
ns/V
0
10
−40
85 °C
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
3