LM3S3739 Datasheet, PDF (28/805 Pages) Texas Instruments – Stellaris® LM3S3739 Microcontroller

Revision History
Table 1. Revision History (continued)
Date
January 2010
Revision Description
6707 ■ In "System Control" section, clarified Debug Access Port operation after Sleep modes.
■ Clarified wording on Flash memory access errors.
■ Added section on Flash interrupts.
■ Changed the reset value of the ADC Sample Sequence Result FIFO n (ADCSSFIFOn) registers
to be indeterminate.
■ Clarified operation of SSI transmit FIFO.
■ Made these changes to the Operating Characteristics chapter:
– Added storage temperature ratings to "Temperature Characteristics" table
– Added "ESD Absolute Maximum Ratings" table
■ Made these changes to the Electrical Characteristics chapter:
– In "Flash Memory Characteristics" table, corrected Mass erase time
– Added sleep and deep-sleep wake-up times ("Sleep Modes AC Characteristics" table)
– In "Reset Characteristics" table, corrected units for supply voltage (VDD) rise time
October 2009
6449
■ Removed the MAXADCSPD bit field from the DCGC0 register as it has no function in deep-sleep
mode.
■ Deleted reset value for 16-bit mode from GPTMTAILR, GPTMTAMATCHR, and GPTMTAR registers
because the module resets in 32-bit mode.
■ Corrected description for ADDR bit field in USBTXFIFOSZ and USBRXFIFOSZ registers.
■ Clarified PWM source for ADC triggering
■ Made these changes to the Electrical Characteristics chapter:
– Removed V_SIH and V_SIL parameters from Operating Conditions table.
– Changed SSI set up and hold times to be expressed in system clocks, not ns.
– Revised ADC electrical specifications to clarify, including reorganizing and adding new data.
– Changed the name of the t_{HIB_REG_WRITE} parameter to t_{HIB_REG_ACCESS}.
– Table added showing actual PLL frequency depending on input crystal.
■ Additional minor data sheet clarifications and corrections.
28
November 17, 2011
Texas Instruments-Production Data