OPA3684 Datasheet, PDF (22/32 Pages) Burr-Brown (TI) – Low-Power, Triple Current-Feedback OPERATIONAL AMPLIFIER With Disable

INPUT AND ESD PROTECTION
The OPA3684 is built using a very high-speed complemen-
tary bipolar process. The internal junction breakdown volt-
ages are relatively low for these very small geometry devices.
These breakdowns are reflected in the Absolute Maximum
Ratings table where an absolute maximum 13V across the
supply pins is reported. All device pins have limited ESD
protection using internal diodes to the power supplies, as
shown in Figure 14.
These diodes provide moderate protection to input overdrive
voltages above the supplies as well. The protection diodes
can typically support 30mA continuous current. Where higher
currents are possible (for example, in systems with ±15V
supply parts driving into the OPA3684), current-limiting se-
ries resistors should be added into the two inputs. Keep
these resistor values as low as possible since high values
degrade both noise performance and frequency response.
External
Pin
+V_CC
–V _CC
FIGURE 14. Internal ESD Protection.
Internal
Circuitry
22
OPA3684
www.ti.com
SBOS241C