MSP430F43X_14 Datasheet, PDF (22/70 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F43x
MIXED SIGNAL MICROCONTROLLER
SLAS713 -- JUNE 2010
electrical characteristics over recommended operating free-air temperature (unless otherwise
noted) (continued)
Schmitt-trigger inputs -- Ports P1, P2, P3, P4, P5, and P6; RST/NMI; JTAG: TCK, TMS, TDI/TCLK, TDO/TDI
PARAMETER
TEST CONDITIONS MIN TYP MAX UNIT
V_IT+
V_IT--
V_hys
Positive-going input threshold voltage
Negative-going input threshold voltage
Input voltage hysteresis (V_IT+ -- V_IT--)
V_CC = 2.2 V
V_CC = 3 V
V_CC = 2.2 V
V_CC = 3 V
V_CC = 2.2 V
V_CC = 3 V
1.1
1.55
V
1.5
1.98
0.4
0.9
V
0.9
1.3
0.3
1.1
V
0.5
1
inputs Px.x, TAx, TBx
PARAMETER
t_(int)
External interrupt timing
TEST CONDITIONS
Port P1, P2: P1.x to P2.x, external trigger signal
for the interrupt flag, (see Note 1)
V_CC
2.2 V
3V
MIN TYP MAX UNIT
62
ns
50
t_(cap)
Timer_A, Timer_B capture
timing
TA0, TA1, TA2
TB0, TB1, TB2
2.2 V
62
ns
3V
50
f_(TAext)
f_(TBext)
Timer_A, Timer_B clock
frequency externally applied
to pin
TACLK, TBCLK, INCLK: t_(H) = t_(L)
2.2 V
3V
8
MHz
10
f_(TAint)
f_(TBint)
NOTES:
Timer_A, Timer_B clock
frequency
SMCLK or ACLK signal selected
2.2 V
3V
8
MHz
10
1. The external signal sets the interrupt flag every time the minimum t_(int) parameters are met. It may be set even with trigger signals
shorter than t_(int).
leakage current -- Ports P1, P2, P3, P4, P5, and P6 (see Note 1)
PARAMETER
TEST CONDITIONS
MIN TYP MAX
I_lkg(Px.y)
Leakage
current
Port Px V_(Px.y) (see Note 2)
V_CC = 2.2 V/3 V
±50
NOTES: 1. The leakage current is measured with V_SS or V_CC applied to the corresponding pin(s), unless otherwise noted.
2. The port pin must be selected as input.
UNIT
nA
22
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265