TPS65951 Datasheet, PDF (20/170 Pages) Texas Instruments – Integrated Power Management/Audio Codec

TPS65951
SWCS053F – SEPTEMBER 2010 – REVISED MAY 2012
www.ti.com
BALL
[1]
PIN
NAME[2]
C3 GPIO.16
DIG.MIC.CLK0
Table 2-1. Ball Characteristics (continued)
A/D TYPE ESD RAIL[8]⁽³⁾
[3] [4]
VDD
REFERENCE
LEVEL
RL[5]
PU[6] (kΩ)⁽⁴⁾
PD[6] (kΩ)⁽⁴⁾
BUFFER
STRENGTH
MIN TYP MAX MIN TYP MAX _(mA)[7]
D I/O IO.1P8
IO.1P8
75 100 202 59 100 144
DO
IO.1P8
IO.1P8
(1) To avoid reflection on this pin due to impedance mismatch, a serial resistance of 33 Ω needs to be added.
(2) VDD rail used as bias in ESD protection during functional mode.
(3) AGND is used as ESD Ground for all PADs.
(4) PUs/PDs are enabled when TPS65952 is in any other state than NO SUPPLY
2.2.1 ESD Electrical Parameters
ESD conditions for CDM and HBM listed in Table 2-2.
Table 2-2. ESD Electrical Parameters
PARAMETER
CDM stress voltage
HBM stress voltage
TEST CONDITIONS
All pads
All pads
MIN
500
2000
TYP
MAX
UNIT
V
V
20
Terminal Description
Submit Documentation Feedback
Product Folder Link(s): TPS65951
Copyright © 2010–2012, Texas Instruments Incorporated