English
Language : 

THS7315_14 Datasheet, PDF (20/28 Pages) Texas Instruments – 3-Channel SDTV Video Amplifier with 5th-Order Filters and 5.2-V/V Gain
THS7315
SLOS532 – JUNE 2007
EVALUATION MODULE (continued)
THS7315EVM Bill of Materials
www.ti.com
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
REF DES
FB1
C16
C17, C18, C19
C15
C1, C2, C3, C12,
C13, C14
C5
C7, C9, C11
C4
C6, C8, C10
RX1–RX6
R4–R9, Z1, Z2, Z3
R1, R2, R3, R10,
R11, R12
J9, J10
J1, J2, J3, J6, J7,
J8
J4, J5
TP1, TP2, TP3
TP4, TP5
U1
Table 1. THS7315D EVM
QTY
1
1
3
DESCRIPTION
Bead, Ferrite, 2.5A, 330 Ω
Capacitor, 100μF, Tantalum, 10V, 10%,
Low-ESR
Open
1 Capacitor, 0.1μF, Ceramic, 16V, X7R
SMD SIZE
0805
C
0603
MANUFACTURER
PART NUMBER
(TDK) MPZ2012S331A
(AVX)
TPSC107K010R0100
0603 (AVX) 0603YC104KAT2A
DISTRIBUTOR
PART NUMBER
(Digi-Key) 445-1569-1-ND
(Digi-Key) 478-1765-1-ND
(Garrett)
0603YC104KAT2A
6 OPEN
0805
1 Capacitor, 0.01μF, Ceramic, 100V, X7R
3 Capacitor, 0.1μF, Ceramic, 50V, X7R
1 Capacitor, 1μF, Ceramic, 16V, X7R
3 Capacitor, Aluminum, 470μF, 10V, 20%
6 Open
9 Resistor, 0 Ω
6 Resistor, 75 Ω, 1/8W, 1%
2
Jack, Banana Receptance, 0.25" dia.
hole
6 Connector, BNC, Jack, 75 Ω
2 Connector, RCA, Jack, R/A
3 Test Point, Red
2 Test Point, Black
1 IC, THS7315
4 Standoff, 4-40 Hex, 0.625" Length
4 Screw, Phillips, 4-40, .250"
1 Printed circuit board
0805
0805
0805
F
0603
0805
0805
D
(AVX) 08051C103KAT2A
(AVX) 08055C104KAT2A
(TDK) C2012X7R1C105K
(Cornell)
AFK477M10F24B
(Digi-Key) 478-1358-1-ND
(Digi-Key) 478-1395-1-ND
(Digi-Key) 445-1358-1-ND
(Newark) 97C7597
(ROHM) MCR10EZHJ000
(Digi-Key)
RHM0.0ACT-ND
(ROHM) MCR10EZHF75.0
(Digi-Key)
RHM75.0CCT-ND
(SPC) 813
(Newark) 39N867
(Amphenol)
31-5329-72RFX
(CUI) RCJ-32265
(Keystone) 5000
(Keystone) 5001
(TI) THS7315D
(Keystone) 1808
(BF) PMS 440 0031 PH
Edge # 6483760 REV. A
(Newark) 93F7554
(Digi-Key) CP-1446-ND
(Digi-Key) 5000K-ND
(Digi-Key) 5001K-ND
(Newark) 89F1934
(Digi-Key) H343-ND
EVALUATION BOARD/KIT IMPORTANT NOTICE
Texas Instruments (TI) provides the enclosed product(s) under the following conditions:
This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR
EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end-product fit for general
consumer use. Persons handling the product(s) must have electronics training and observe good engineering
practice standards. As such, the goods being provided are not intended to be complete in terms of required
design-, marketing-, and/or manufacturing-related protective considerations, including product safety and
environmental measures typically found in end products that incorporate such semiconductor components or
circuit boards. This evaluation board/kit does not fall within the scope of the European Union directives
regarding electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and
therefore may not meet the technical requirements of these directives or other related directives.
Should this evaluation board/kit not meet the specifications indicated in the User’s Guide, the board/kit may be
returned within 30 days from the date of delivery for a full refund. THE FOREGOING WARRANTY IS THE
EXCLUSIVE WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR ANY PARTICULAR PURPOSE.
20
Submit Documentation Feedback