TPS71550-DIE Datasheet, PDF (2/4 Pages) Texas Instruments – LOW-DROPOUT LINEAR REGULATOR

TPS71550-DIE
SLVSBG8 – JULY 2012
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
BARE DIE INFORMATION
DIE THICKNESS
15 mils.
BACKSIDE FINISH
Silicon with backgrind
BACKSIDE
POTENTIAL
Floating
BOND PAD
METALLIZATION COMPOSITION
Aluminium Pad (TiW/AlSiCu
(0.5%))
BOND PAD
THICKNESS
600 nm
607.5
684.0
DESCRIPTION
GND
OUT
VIN
(1) Substrate is to float.
0
52
SCRIBE
0
52 SCRIBE
Table 1. Bond Pad Coordinates in Microns⁽¹⁾
PAD NUMBER
1
2
3
4
X MIN
6.03
507.78
465.93
15.39
Y MIN
5.40
15.30
583.74
583.74
X MAX
90.09
591.84
591.84
141.30
Y MAX
89.46
99.36
667.80
667.80
2
Submit Documentation Feedback
Product Folder Link(s): TPS71550-DIE
Copyright © 2012, Texas Instruments Incorporated