TMP104EVM Datasheet, PDF (2/25 Pages) Texas Instruments – TMP104EVM Evaluation Board and Software Tutorial

Overview
www.ti.com
1 Overview
The TMP104 is a digital output temperature sensor in a four-ball, wafer chip-scale package (WCSP). The
TMP104 is capable of reading temperatures to a resolution of 1°C, and is specified for operation over a
temperature range of –40°C to +125°C.
The TMP104 features a one-wire UART-style interface that supports daisy-chain configurations. In
addition, the interface supports multiple device access (MDA) commands that allow the master to
communicate with multiple devices on the bus simultaneously, eliminating the need to send individual
commands to each TMP104 on the bus. Up to 16 TMP104s can be tied together in parallel and easily
read by the host. This device is especially ideal for space-constrained, power-sensitive applications with
multiple temperature measurement zones that must be monitored.
The TMP104EVM is a platform for evaluating the performance of the TMP104 under various signal,
reference, and supply conditions. This document gives a general overview of the TMP104EVM and
provides a general description of the features and functions to be considered while using this evaluation
module.
1.1 TMP104EVM Kit Contents
Table 1 summarizes the contents of the TMP104EVM kit. Figure 1 shows all of the included hardware.
Contact the Texas Instruments Product Information Center nearest you if any component is missing. It is
highly recommended that you also check the TMP104 product folder on the TI web site at www.ti.com to
verify that you have the latest versions of the related software.
Table 1. TMP104EVM Kit Contents
Item
TMP104EVM PCB test board
SM-USB-DIG platform PCB
USB extender cable
10-pin connector ribbon cable
User’s guide CD-ROM
Quantity
1
1
1
1
1
Figure 1. Hardware Included with TMP104EVM Kit
2
TMP104EVM Evaluation Board and Software Tutorial
Copyright © 2011, Texas Instruments Incorporated
SBOU118 – October 2011
Submit Documentation Feedback