PCM2900_17 Datasheet, PDF (2/37 Pages) Texas Instruments – STEREO AUDIO CODEC WITH USB INTERFACE, SINGLE-ENDED ANALOG INPUT/OUTPUT AND S/PDIF

Not Recommended for New Designs
PCM2900
PCM2902
SLES035E – MARCH 2007 – REVISED MARCH 2008
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PACKAGING ORDERING INFORMATION
PRODUCT
PACKAGE-LEAD
PACKAGE
DESIGNATOR
PCM2900E
SSOP-28
28DB
PCM2900
SPECIFIED
TEMPERATURE
RANGE
–25°C to 85°C
PACKAGE
MARKING
PCM2900E
ORDERING
NUMBER ⁽¹⁾
PCM2900E
PCM2900E/2K
TRANSPORT
MEDIA
Rails
Tape and reel
(1) Models with a slash (/) are available only in tape and reel in the quantities indicated (e.g., /2K indicates 2000 devices per reel). Ordering
2000 pieces of PCM2900E/2K gets a single 2000-piece tape and reel.
PRODUCT
PACKAGE-LEAD
PACKAGE
DESIGNATOR
PCM2902E
SSOP-28
28DB
PCM2902
SPECIFIED
TEMPERATURE
RANGE
–25°C to 85°C
PACKAGE
MARKING
PCM2902E
ORDERING
NUMBER ⁽¹⁾
PCM2902E
PCM2902E/2K
TRANSPORT
MEDIA
Rails
Tape and reel
(1) Models with a slash (/) are available only in tape and reel in the quantities indicated (e.g., /2K indicates 2000 devices per reel). Ordering
2000 pieces of PCM2902E/2K gets a single 2000-piece tape and reel.
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
V_BUS
T_stg
T_J
Supply voltage
Ground voltage differences, AGNDC, AGNDP, AGNDX, DGND, DGNDU
SEL0, SEL1, TEST0 (DIN)⁽²⁾
Digital input voltage _{D+, D–, HID0, HID1, HID2, XTI, XTO, TEST1 (DOUT)(2), SSPND}
Analog input
voltage
V_INL, V_INR, V_COM, V_OUTR, V_OUTL
V_CCCI, V_CCP1I, V_CCP2I, V_CCXI, V_DDI
Input current (any pins except supplies)
Ambient temperature under bias
Storage temperature
Junction temperature
Lead temperature (soldering)
Package temperature (IR reflow, peak)
PCM2900/PCM2902
–0.3 to 6.5
±0.1
–0.3 to 6.5
–0.3 to (V_DDI + 0.3) < 4
–0.3 to (V_CCCI + 0.3) < 4
–0.3 to 4
±10
–40 to 125
–55 to 150
150
260
250
UNIT
V
V
V
V
V
V
mA
°C
°C
°C
°C, 5 s
°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) ( ): PCM2902
2
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): PCM2900 PCM2902