OPA4364-Q1 Datasheet, PDF (2/21 Pages) Texas Instruments – 1.8-V, 7-MHz, 90-dB CMRR, SINGLE-SUPPLY, RAIL-TO-RAIL I/O OPERATIONAL AMPLIFIER

OPA2364-Q1, OPA4364-Q1
SGLS363A – JUNE 2006 – REVISED OCTOBER 2006
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be
more susceptible to damage because very small parametric changes could cause the device not to meet its published
specifications.
PRODUCT
OPA2364AQDRQ1
OPA4364AQDRQ1
PACKAGE
LEAD
SO-8
SO-14
ORDERING INFORMATION
PACKAGE
DESIGNATOR
D
D
T_A
–40°C to 125°C
–40°C to 125°C
PACKAGE
MARKING
OP2364
OPA4364AQ
ORDERING
NUMBER
TRANSPORT MEDIA,
QUANTITY
OPA2364AQDRQ1 Tape and reel, 2500
OPA4364AQDRQ1 Tape and reel, 2500
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
over operating free-air temperature range (unless otherwise noted)
Supply voltage
Signal input terminals
Enable input range
Output short circuit⁽³⁾
Operating temperature range
T_stg
Storage temperature range
T_J
Junction temperature
Lead temperature (soldering, 10 s)
Voltage range⁽²⁾
Current ⁽²⁾
MIN
–0.5
(V–) –0.5
–40
–65
MAX
5.5
(V+) + 0.5
±10
5.5
Continuous
150
150
150
300
UNIT
V
V
mA
V
°C
°C
°C
°C
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not implied.
(2) Input terminals are diode clamped to the power-supply rails. Input signals that can swing more than 0.5 V beyond the supply rails should
be current limited to 10 mA or less.
(3) Short circuit to ground one amplifier per package
2
Submit Documentation Feedback