LMV712-N Datasheet, PDF (2/22 Pages) Texas Instruments – LMV712-N Low Power, Low Noise, High Output, RRIO Dual Operational Amplifier with Independent Shutdown

LMV712-N
SNOS534G – MAY 2004 – REVISED MARCH 2010
Typical Application Circuit
www.ti.com
Figure 1. P.A. Control Loop
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings ⁽¹⁾⁽²⁾
ESD Tolerance ⁽³⁾
Human Body Model
Machine Model
Differential Input Voltage
Voltage at Input/Output Pin
Supply Voltage (V⁺ - V^−)
Output Short Circuit V⁺
Output Short Circuit V^−
Current at Input Pin
Current at Output Pin
Storage Temp Range
Junction Temperature T_JMAX(5)
Soldering specification for WSON SnPb:
Infrared or Convection (20sec)
Soldering specification for all other packages:
see product folder at www.national.com and
www.national.com/ms/MS/MS-SOLDERING.pdf
1.5kV
150V
±Supply Voltage
(V⁺) +0.4V to (V^−) −0.4V
6V
(4)
(4)
±10mA
±50mA
−65°C to 150°C
150°C
235°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test
conditions, see the Electrical Characteristics.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office / Distributors for
availability and specifications.
(3) Human Body Model, applicable std. MIL-STD-883, Method 3015.7. Machine Model, applicable std. JESD22-A115-A (ESD MM std. of
JEDEC)Field-Induced Charge-Device Model, applicable std. JESD22-C101-C (ESD FICDM std. of JEDEC).
(4) Shorting circuit output to either V⁺ or V^− will adversely affect reliability.
(5) The maximum power dissipation is a function of T_J(MAX), θ_JA. The maximum allowable power dissipation at any ambient temperature is
P_D = (T_J(MAX) – T_A)/ θ_JA. All numbers apply for packages soldered directly onto a PC Board.
2
Submit Documentation Feedback
Copyright © 2004–2010, Texas Instruments Incorporated
Product Folder Links: LMV712-N