LMH0001 Datasheet, PDF (2/11 Pages) Intersil Corporation – SMPTE 259M / 344M Serial Digital Cable Driver

LMH0001
SNLS276C – AUGUST 2007 – REVISED APRIL 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings ⁽¹⁾
Supply Voltage:
Input Voltage (all inputs)
Output Current
Storage Temperature Range
Junction Temperature
Lead Temperature
(Soldering 4 Sec)
Package Thermal Resistance
θ_JA 16-pin WQFN
θ_JC 16-pin WQFN
ESD Rating (HBM)
ESD Rating (MM)
−0.5V to 3.6V
−0.3V to V_CC+0.3V
28mA
−65°C to +150°C
+150°C
+260°C
+78.9°C/W
+42.7°C/W
5kV
250V
(1) Absolute Maximum Ratings are those parameter values beyond which the life and operation of the device cannot be ensured. The
stating herein of these maximums shall not be construed to imply that the device can or should be operated at or beyond these values.
The table of Electrical Characteristics specifies acceptable device operating conditions.
Recommended Operating Conditions
Supply Voltage (V_CC – V_EE):
Operating Free Air Temperature (T_A)
3.3V ±5%
−40°C to +85°C
DC Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified ⁽¹⁾⁽²⁾.
Parameter
Test Conditions
Reference
Min
Typ Max Unit
V_CMIN
V_SDI
V_CMOUT
V_SDO
Input Common Mode
Voltage
Input Voltage Swing
Output Common Mode
Voltage
Output Voltage Swing
I_CC
Supply Current
Differential
Single-ended, 75Ω load,
R_REF = 750Ω 1%
Single-ended, 75Ω load,
R_REF = 590Ω 1%
SDI, SDI
SDO, SDO
1.6 +
V_SDI/2
100
750
900
V_CC –
V_SDO
800
V_CC –
V_SDI/2
2000
V
mV_P−P
V
850 mV_P-P
1000
(3)₃₈
1100 mV_P-P
43 mA
(1) Current flow into device pins is defined as positive. Current flow out of device pins is defined as negative. All voltages are stated
referenced to V_EE = 0 Volts.
(2) Typical values are stated for V_CC = +3.3V and T_A = +25°C.
(3) Maximum I_CC is measured at V_CC = +3.465V and T_A = +70°C.
2
Submit Documentation Feedback
Product Folder Links: LMH0001
Copyright © 2007–2013, Texas Instruments Incorporated