K04RLM12 Datasheet, PDF (2/23 Pages) Texas Instruments – Operational Amplifier

K04RLM12, LM12CL
OBSOLETE
SNOSBY8D – MAY 1999 – REVISED APRIL 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings⁽¹⁾⁽²⁾
Total Supply Voltage⁽¹⁾
Input Voltage
Output Current
Junction Temperature
Storage Temperature Range
Lead Temperature (Soldering, 10 seconds)
80V
See ⁽³⁾
Internally Limited
See ⁽⁴⁾
−65°C to 150°C
300°C
(1) Absolute maximum ratings indicate limits beyond which damage to the device may occur. The maximum voltage for which the LM12 is
ensured to operate is given in the operating ratings and in Note 4. With inductive loads or output shorts, other restrictions described in
applications section apply.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
(3) Neither input should exceed the supply voltage by more than 50 volts nor should the voltage between one input and any other terminal
exceed 60 volts.
(4) Operating junction temperature is internally limited near 225°C within the power transistor and 160°C for the control circuitry.
Operating Ratings
Total Supply Voltage
Case Temperature⁽¹⁾
15V to 60V
0°C to 70°C
(1) The supply voltage is ±30V (V_MAX = 60V), unless otherwise specified. The voltage across the conducting output transistor (supply to
output) is V_DISS and internal power dissipation is P_DISS. Temperature range is 0°C ≤ T_C ≤ 70°C where T_C is the case temperature.
Standard typeface indicates limits at 25°C while boldface type refers to limits or special conditions over full temperature range.
With no heat sink, the package will heat at a rate of 35°C/sec per 100W of internal dissipation.
2
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: K04RLM12 LM12CL