INA200AIDR Datasheet, PDF (2/27 Pages) Texas Instruments – High-Side Measurement Current-Shunt Monitor with Open-Drain Comparator and Reference

INA200
INA201
INA202
SBOS374C – NOVEMBER 2006 – REVISED OCTOBER 2010
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PRODUCT
INA200
INA201
INA202
GAIN
20V/V
50V/V
100V/V
ORDERING INFORMATION⁽¹⁾
PACKAGE-LEAD
PACKAGE
DESIGNATOR
MSOP-8
DGK
SO-8
D
MSOP-8
DGK
SO-8
D
MSOP-8
DGK
SO-8
D
PACKAGE MARKING
BQH
INA200A
BQJ
INA201A
BQL
INA202A
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the
device product folder at www.ti.com.
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Supply Voltage, V+
Current-Shunt Monitor Analog Inputs, V_IN+, V_IN–
Differential (V_IN+) – (V_IN–)
Common Mode⁽²⁾
Comparator Analog Input and Reset Pins⁽²⁾
Analog Output, Out⁽²⁾
Comparator Output, Out Pin⁽²⁾
Input Current Into Any Pin⁽²⁾
Operating Temperature
Storage Temperature
Junction Temperature
ES Human Body Model (HBM)
D
Rat
Charged Device Model (CDM)
ing
s
VALUE
18
–18 to +18
–16 to +80
GND – 0.3 to (V+) + 0.3
GND – 0.3 to (V+) + 0.3
GND – 0.3 to 18
5
–55 to +150
–65 to +150
+150
4000
1000
UNIT
V
V
V
V
V
V
mA
°C
°C
°C
V
V
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not supported.
(2) This voltage may exceed the ratings shown if the current at that pin is limited to 5mA.
PIN CONFIGURATIONS
INA200-INA202
V+ 1
OUT 2
CMP_IN 3
GND 4
8 V_IN+
7 V_IN-
6 CMP_OUT
5 RESET
MSOP-8 (DGK),
SO-8 (D)
2
Submit Documentation Feedback
Copyright © 2006–2010, Texas Instruments Incorporated
Product Folder Link(s): INA200 INA201 INA202