DS90LV027AQ_14 Datasheet, PDF (2/14 Pages) Texas Instruments – Automotive LVDS Dual Differential Driver

DS90LV027AQ
SNLS298D – MAY 2008 – REVISED APRIL 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings⁽¹⁾⁽²⁾
Supply Voltage (V_CC)
Input Voltage (DI)
Output Voltage (DO±)
Maximum Package Power Dissipation @ +25°C
D Package
Derate D Package
Package Thermal Resistance (4-Layer, 2 oz. Cu, JEDEC)
θ_JA
θ_JC
Storage Temperature Range
Lead Temperature Range Soldering
(4 sec.)
Maximum Junction Temperature
ESD Ratings
HBM ⁽³⁾
MM ⁽⁴⁾
CDM ⁽⁵⁾
−0.3V to +4V
−0.3V to (V_CC + 0.3V)
−0.3V to +3.9V
1068 mW
9.71 mW/°C above +25°C
103.0°C/W
50.0°C/W
−65°C to +150°C
+260°C
+135°C
≥ 8kV
≥ 250V
≥ 1250V
(1) Absolute Maximum Ratings are those values beyond which the safety of the device cannot be ensured. They are not meant to imply that
the devices should be operated at these limits. Electrical Characteristics specifies conditions of device operation.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(3) Human Body Model, applicable std. JESD22-A114C
(4) Machine Model, applicable std. JESD22-A115-A
(5) Field Induced Charge Device Model, applicable std. JESD22-C101-C
Recommended Operating Conditions
Supply Voltage (V_CC)
Temperature (T_A)
Min
Typ
Max
3.0
3.3
3.6
−40
25
+125
Units
V
°C
Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified.^(1)(2)(3)
Symbol
Parameter
Conditions
Pin
Min
Typ Max Units
DIFFERENTIAL DRIVER CHARACTERISTICS
V_OD
ΔV_OD
V_OH
V_OL
V_OS
ΔV_OS
I_OXD
I_OSD
Output Differential Voltage
V_OD Magnitude Change
Output High Voltage
Output Low Voltage
Offset Voltage
Offset Magnitude Change
Power-off Leakage
Output Short Circuit Current
R_L = 100Ω
(Figure 2)
V_OUT = V_CC or GND, V_CC = 0V
DO+, 250
360
450
mV
DO−
1
35
mV
1.4
1.6
V
0.9
1.1
V
1.125 1.2 1.375
V
0
3
25
mV
±1
±10
μA
−5.7
−8
mA
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
except V_OD.
(2) All typicals are given for: V_CC = +3.3V and T_A = +25°C.
(3) The DS90LV027AQ is a current mode device and only function with datasheet specification when a resistive load is applied to the
drivers outputs.
2
Submit Documentation Feedback
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: DS90LV027AQ