DS90LV011AQ_15 Datasheet, PDF (2/12 Pages) Texas Instruments – Automotive LVDS Differential Driver

DS90LV011AQ
SNLS296D – MAY 2008 – REVISED APRIL 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings ⁽¹⁾⁽²⁾
Supply Voltage (V_DD)
LVCMOS input voltage (TTL IN)
LVDS output voltage (OUT±)
LVDS output short circuit current
Maximum Package Power Dissipation @ +25°C
DBV Package
Derate DBV Package
Package Thermal Resistance (4-Layer, 2 oz. Cu, JEDEC)
θ_JA
θ_JC
Storage Temperature
Lead Temperature Range Soldering
(4 sec.)
Maximum Junction Temperature
ESD Ratings
HBM ⁽³⁾
MM ⁽⁴⁾
CDM ⁽⁵⁾
−0.3V to 4.0V
−0.3V to to (V_DD + 0.3V)
−0.3V to +3.9V
24mA
794 mW
7.22 mW/°C above +25°C
138.5°C/Watt
107.0°C/Watt
−65°C to +150°C
+260°C
+135°C
≥ 8kV
≥ 250V
≥ 1250V
(1) Absolute Maximum Ratings are those values beyond which the safety of the device cannot be ensured. They are not meant to imply that
the devices should be operated at these limits. Electrical Characteristics specifies conditions of device operation.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
(3) Human Body Model, applicable std. JESD22-A114C
(4) Machine Model, applicable std. JESD22-A115-A
(5) Field Induced Charge Device Model, applicable std. JESD22-C101-C
Recommended Operating Conditions
Supply Voltage (V_DD)
Temperature (T_A)
Min
Typ
Max
3.0
3.3
3.6
−40
+25
+125
Units
V
°C
Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified.^(1)(2)(3)
Symbol
Parameter
Conditions
Pin
Min
Typ Max Units
|V_OD|
ΔV_OD
V_OS
ΔV_OS
I_OFF
I_OS
I_OSD
Output Differential Voltage
V_OD Magnitude Change
Offset Voltage
Offset Magnitude Change
Power-off Leakage
Output Short Circuit Current ⁽⁴⁾
Differential Output Short Circuit
Current ⁽⁴⁾
R_L = 100Ω
(Figure 2 and Figure 3)
R_L = 100Ω
(Figure 2)
V_OUT = 3.6V or GND, V_DD = 0V
V_OUT+ and V_OUT− = 0V
V_OD = 0V
OUT+, 250
350
450
mV
OUT−
3
35
mV
1.125 1.22 1.375
V
0
1
25
mV
±1
±10
μA
−6
−24
mA
−5
−12
mA
C_OUT
Output Capacitance
3
pF
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
except V_OD.
(2) All typicals are given for: V_DD = +3.3V and T_A = +25°C.
(3) The DS90LV011AQ is a current mode device and only function with datasheet specification when a resistive load is applied to the
drivers outputs.
(4) Output short circuit current (I_OS) is specified as magnitude only, minus sign indicates direction only.
2
Submit Documentation Feedback
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: DS90LV011AQ