DS90CF363BMTX Datasheet, PDF (2/15 Pages) Texas Instruments – +3.3V Programmable LVDS Transmitter 18-Bit Flat Panel Display (FPD) Link -65 MHz

DS90CF363B
SNLS180D – JULY 2004 – REVISED APRIL 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings ⁽¹⁾⁽²⁾
Supply Voltage (V_CC)
CMOS/TTL Input Voltage
LVDS Driver Output Voltage
LVDS Output Short Circuit
Duration
Junction Temperature
Storage Temperature
Lead Temperature
(Soldering, 4 sec)
Maximum Package Power Dissipation Capacity @ 25°C
DGG-48 (TSSOP) Package: DS90CF363B
Package Derating:
DS90CF363B
ESD Rating (HBM, 1.5 kΩ, 100 pF)
ESD Rating (EIAJ, 0Ω, 200 pF)
Value
−0.3 to +4
−0.3 to (V_CC + 0.3)
−0.3 to (V_CC + 0.3)
Continuous
+150
−65 to +150
+260
1.98
16 mW/°C above +25°C
7
500
Unit
V
V
V
°C
°C
°C
W
kV
V
(1) Absolute Maximum Ratings are those values beyond which the safety of the device cannot be verified. They are not meant to imply that
the device should be operated at these limits. Electrical Characteristics specify conditions for device operation.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
Recommended Operating Conditions
Supply Voltage (V_CC)
Operating Free Air Temperature (T_A)
Supply Noise Voltage (V_CC)
TxCLKIN frequency
Min
Nom
Max
3.0
3.3
3.6
−10
+25
+70
200
18
68
Units
V
°C
mV_PP
MHz
Electrical Characteristics⁽¹⁾
Over recommended operating supply and temperature ranges unless otherwise specified.
Symbol
Parameter
Conditions
CMOS/TTL DC SPECIFICATIONS
V_IH
High Level Input Voltage
V_IL
Low Level Input Voltage
V_CL
Input Clamp Voltage
I_IN
Input Current
LVDS DC SPECIFICATIONS
I_CL = −18 mA
V _IN = 0.4V, 2.5V or V_CC
V _IN = GND
V_OD
ΔV_OD
V_OS
ΔV_OS
Differential Output Voltage
Change in V_OD between complimentary
output states
Offset Voltage ⁽³⁾
Change in V_OS between complimentary
output states
R_L = 100Ω
I_OS
Output Short Circuit Current
V_OUT = 0V, R_L = 100Ω
Min Typ⁽²⁾ Max
2.0
GND
−10
−0.79
+1.8
0
V_CC
0.8
−1.5
+10
250 345 450
35
1.13 1.25 1.38
35
−3.5
−5
Units
V
V
V
μA
μA
mV
mV
V
mV
mA
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. Voltages are referenced to ground
unless otherwise specified (except V_OD and ΔV_OD ).
(2) Typical values are given for V_CC = 3.3V and T _A = +25°C unless specified otherwise.
(3) V_OS previously referred as V_CM.
2
Submit Documentation Feedback
Copyright © 2004–2013, Texas Instruments Incorporated
Product Folder Links: DS90CF363B