DRV411EVM Datasheet, PDF (2/13 Pages) Texas Instruments – DRV411EVM Users Guide

EVM Overview
1 EVM Overview
www.ti.com
1.1 Features
• Full-featured evaluation board for the DRV411
• Pin sockets for easily changing Hall sensor devices
• Built-in reference
1.2 Introduction
This document provides the information needed to set up and operate the DRV411 evaluation module
(EVM), a test platform for the DRV411 full-bridge drive integrated circuit for closed loop Hall-sensor
devices. For a more detailed description of the DRV411, please refer to the product data sheet, SBOS693.
Additional support documents are listed in Related Documents from Texas Instruments.
Throughout this document, the abbreviation EVM and the term evaluation module are synonymous with
the DRV411EVM.
2 DRV411EVM Hardware
Figure 1 shows the complete DRV411EVM hardware. The evaluation kit consists of a single printed-circuit
board with a variety of test points (to monitor supply, reference, and output voltages) and jumpers to
enable or disable various features of the DRV411 device.
2
DRV411EVM User's Guide
Figure 1. DRV411EVM Board
SLVU772A – August 2013 – Revised November 2013
Copyright © 2013, Texas Instruments Incorporated
Submit Documentation Feedback