DRV2603_14 Datasheet, PDF (2/19 Pages) Texas Instruments – Haptic Drive with Auto-Resonance Detection for Linear Resonance Actuators (LRA)

DRV2603
SLOS754A – JUNE 2012 – REVISED JANUARY 2014
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Part Number
DRV2603RUNR
DRV2603RUNT
ORDERING INFORMATION
Package
10-pin, 2 mm x 2 mm x 0.75 mm, RUN
10-pin, 2 mm x 2 mm x 0.75 mm, RUN
Symbolization
2603
2603
NAME
PWM
EN
LRA/ERM
GND
NC
OUT–
OUT+
VDD
PIN
NUMBER
2
1
3
5, 8, 10
4
6
9
7
PINOUT INFORMATION
10-PIN RUN
GND
10
EN ¹
PWM ²
LRA / ERM ³
NC 4
5
GND
9 _{OUT +}
8 _GND
7 _VDD
6 _{OUT -}
PIN FUNCTIONS
INPUT/
OUTPUT/
POWER (I/O/P)
DESCRIPTION
I
Input signal
I
Device enable
I
Mode selection
P
Supply ground
I
No Connection
O
Negative haptic driver differential output
O
Positive haptic driver differential output
P
Supply Input (2.5 V to 5.5 V)
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
over operating free-air temperature range, T_A = 25°C (unless otherwise noted)
Supply voltage
VDD
V_I
Input voltage
EN, PWM, LRA/ERM
T_A
Operating free-air temperature range
T_J
Operating junction temperature range
T_stg Storage temperature range
ESD Protection
HBM
CDM
VALUE
–0.3 to 6.0
–0.3 to V_DD + 0.3
–40 to 85
–40 to 150
–65 to 150
2000
500
UNIT
V
V
°C
°C
°C
V
V
(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating
conditions” is not implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability.
2
Submit Documentation Feedback
Product Folder Links :DRV2603
Copyright © 2012–2014, Texas Instruments Incorporated