ADS8325 Datasheet, PDF (2/36 Pages) Burr-Brown (TI) – 16-Bit, High-Speed, 2.7V to 5.5V microPower Sampling ANALOG-TO-DIGITAL CONVERTER

ADS8325
SBAS226C – MARCH 2002 – REVISED AUGUST 2007
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PRODUCT
ADS8325I
MAXIMUM
INTEGRAL
LINEARITY
ERROR (LSB)
±6
PACKAGE/ORDERING INFORMATION⁽¹⁾
NO MISSING
CODES ERROR
(LSB) ⁽²⁾
15
PACKAGE-
LEAD
MSOP-8
PACKAGE
DESIGNATOR
DGK
SPECIFIED
TEMPERATURE
RANGE
–40°C to +85°C
PACKAGE
MARKING
B25
ADS8325IB
±4
16
MSOP-8
DGK
–40°C to +85°C
B25
ADS8325I
±6
15
SON-8
DRB
–40°C to +85°C
B25
ADS8325IB
±4
16
SON-8
DRB
–40°C to +85°C
B25
(1) For the most current specifications and package information, refer to our web site at www.ti.com.
(2) No Missing Codes Error specifies a 5V power supply and reference voltage.
ORDERING
NUMBER
ADS8325IDGKT
ADS8325IDGKR
ADS8325IBDGKT
ADS8325IBDGKR
ADS8325IDRBT
ADS8325IDRBR
ADS8325IBDRBT
ADS8325IBDRBR
TRANSPORT MEDIA,
QUANTITY
Tape and Reel, 250
Tape and Reel, 2500
Tape and Reel, 250
Tape and Reel, 2500
Tape and Reel, 250
Tape and Reel, 2500
Tape and Reel, 250
Tape and Reel, 2500
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Over operating free-air temperature range (unless otherwise noted)
T_J
T_A
T_STG
Supply voltage, DGND to V_DD
Analog input voltage⁽²⁾
Reference input voltage⁽²⁾
Digital input voltage⁽²⁾
Input current to any pin except supply
Power dissipation
Operating virtual junction temperature range
Operating free-air temperature range
Storage temperature range
Lead temperature 1,6 mm (1/16 inch) from case for 10 sec
ADS8325
UNIT
–0.3 to 6
V
–0.3 to V_DD + 0.3
V
–0.3 to V_DD + 0.3
V
–0.3 to V_DD + 0.3
V
–20 to 20
mA
See Dissipation Rating Table
–40 to +150
°C
–40 to +85
°C
–65 to +150
°C
+260
°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions of extended periods may affect device reliability.
(2) All voltage values are with respect to ground terminal.
PACKAGE DISSIPATION RATINGS
PACKAGE
DGK
DRB
R_θJC
39.1°C/W
5°C/W
R_θJA
206.3°C/W
45.8°C/W
DERATING FACTOR
ABOVE T_A = +25°C
4.847mW/°C
3.7mW/C
T_A ≤ +25°C
POWER RATING
606mW
370mW
T_A = +70°C
POWER RATING
388mW
204mW
T_A = +85°C
POWER RATING
315mW
148mW
2
Submit Documentation Feedback
Product Folder Link(s): ADS8325
Copyright © 2002–2007, Texas Instruments Incorporated