LMV321 Datasheet, PDF (19/30 Pages) Texas Instruments – LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS

FIGURE 15. State Variable Active Filter
From Equation 12,
10006039
From the above calculated values, the midband gain is
H₀ = R₃/R₂ = 100 (40 dB). The nearest 5% standard values
have been added to Figure 15.
PULSE GENERATORS AND OSCILLATORS
A pulse generator is shown in Figure 16. Two diodes have
been used to separate the charge and discharge paths to ca-
pacitor C.
where for all three filters,
(11)
(12)
A design example for a bandpass filter is shown below:
Assume the system design requires a bandpass filter with f _O
= 1 kHz and Q = 50. What needs to be calculated are capacitor
and resistor values.
First choose convenient values for C₁, R₁ and R₂:
C₁ = 1200 pF
2R₂ = R₁ = 30 kΩ
Then from Equation 11,
10006081
FIGURE 16. Pulse Generator
www.national.com
18