PT6620_14 Datasheet, PDF (17/19 Pages) Texas Instruments – Single Device: 6-A Output

EEM (R–PSIP–T14)
0.73
(18,54)
0.210 (5,33)
0.040 (1,01)
Note G
MECHANICAL DATA
MPSI021 – MARCH 2001
PLASTIC SINGLE-IN-LINE MODULE
0.38
(9,65)
1.71 (43,43) MAX.
0.59
(14,98)
0.040
(1,01)
0.042 (1,06)
0.036 (0,91)
0.032 (0,81)
0.52
(13,20)
1.22 (30,98)
MAX.
0.205 (5,20)
0.175 (4,44)
0.100
(2,54)
1
0.100 (2,54) TYP.
0.017 (0,43) TYP.
1.77 (44,95)
0.040 (1,01)
0.42
(10,66)
MAX.
1.42 (30,06)
0.78
0.210
(19,81)
(5,33)
ø0.070 (1,77) MIN. 2 Places
Plated through
Note E
0.20
(5,08)
0.917
(23,29)
0.080
(2,03)
Note F
3 Places
1.31
(33,27)
1.040
(26,41)
Note G ^1.040
(26,41)
CL to CL
0.017 (0,43) TYP.
0.140 (3,55) MIN.
0.07
(1,77)
0.040 (1,01)
ø0.035 (0,88) MIN. 14 Places
Plated through
0.100 (2,54) 13 Places
0.235 (5,97)
PC LAYOUT
NOTES: A. All linear dimensions are in inches (mm).
B. This drawing is subject to change without notice.
C. 2-place decimals are " 0.030 (" 0, 76 mm).
D. 3-place deciamals are " 0.010 (" 0, 25 mm).
E. Recommended mechanical keep-out area.
F. No copper, power or signal traces in this area.
4202013/A 02/01
G. The metal tab is isolated but electrically conductive.
No signal traces are allowed under the metal tab area.
A solid copper island is recommended, which may be
grounded to the two underside pins.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1