LM5010SD Datasheet, PDF (17/26 Pages) Texas Instruments – High-Voltage 1-A Step-Down Switching Regulator

PACKAGE OPTION ADDENDUM
www.ti.com
17-Nov-2012
PACKAGING INFORMATION
Orderable Device
LM5010MH
LM5010MH/NOPB
LM5010MHX/NOPB
LM5010SD
LM5010SD/NOPB
LM5010SDX
LM5010SDX/NOPB
Status Package Type Package Pins Package Qty
(1)
Drawing
Eco Plan Lead/Ball Finish MSL Peak Temp
(2)
(3)
ACTIVE HTSSOP
PWP 14
94
TBD
CU SNPB Level-1-260C-UNLIM
ACTIVE HTSSOP
PWP 14
94
Green (RoHS
CU SN Level-1-260C-UNLIM
& no Sb/Br)
ACTIVE HTSSOP
PWP 14
2500
Green (RoHS
& no Sb/Br)
CU SN Level-1-260C-UNLIM
ACTIVE
WSON
DPR 10
1000
TBD
CU SNPB Level-1-260C-UNLIM
ACTIVE
WSON
DPR 10
1000
Green (RoHS
& no Sb/Br)
SN
Level-1-260C-UNLIM
ACTIVE
WSON
DPR 10
4500
TBD
SNPB Level-1-260C-UNLIM
ACTIVE
WSON
DPR 10
4500
Green (RoHS
& no Sb/Br)
SN
Level-1-260C-UNLIM
(1) _{The marketing status values are defined as follows:}
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
Samples
(Requires Login)
(2) _{Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability}
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) _{MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.}
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
Addendum-Page 1