LP38501TS-ADJ Datasheet, PDF (16/22 Pages) Texas Instruments – LP38501/3-ADJ, LP38501A/3A-ADJ 3A FlexCap Low Dropout Linear Regulator for 2.7V to 5.5V Inputs

PACKAGE OPTION ADDENDUM
www.ti.com
21-May-2013
PACKAGING INFORMATION
Orderable Device
LP38501ATJ-ADJ/NOPB
LP38501TJ-ADJ/NOPB
LP38501TS-ADJ/NOPB
LP38501TSX-ADJ/NOPB
LP38503ATJ-ADJ/NOPB
LP38503TJ-ADJ/NOPB
LP38503TS-ADJ/NOPB
LP38503TSX-ADJ/NOPB
Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C)
(1)
Drawing
Qty
(2)
(3)
ACTIVE TO-263
NDQ 5 1000 Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM -40 to 125
ACTIVE TO-263
NDQ 5 1000 Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
ACTIVE
DDPAK/
TO-263
KTT
5
45 Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR -40 to 125
ACTIVE
DDPAK/
TO-263
KTT
5
500 Pb-Free (RoHS CU SN
Level-3-245C-168 HR -40 to 125
Exempt)
ACTIVE TO-263
NDQ 5 1000 Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM -40 to 125
ACTIVE TO-263
NDQ 5 1000 Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM -40 to 125
ACTIVE
DDPAK/
TO-263
KTT
5
45 Pb-Free (RoHS
Exempt)
CU SN
Level-3-245C-168 HR -40 to 125
ACTIVE
DDPAK/
TO-263
KTT
5
500 Pb-Free (RoHS CU SN
Level-3-245C-168 HR -40 to 125
Exempt)
(1) _{The marketing status values are defined as follows:}
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
Device Marking
(4/5)
LP38501A
TJ-ADJ
LP38501
TJ-ADJ
LP38501
TS-ADJ
LP38501
TS-ADJ
LP38503A
TJ-ADJ
LP38503
TJ-ADJ
LP38503
TS-ADJ
LP38503
TS-ADJ
(2) _{Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability}
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) _{MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.}
Samples
Addendum-Page 1