SN54LV594A_15 Datasheet, PDF (15/28 Pages) Texas Instruments – 8-Bit Shift Registers With Output Registers

www.ti.com
9 Application and Implementation
SN54LV594A, SN74LV594A
SCLS413J – APRIL 2005 – REVISED MARCH 2015
NOTE
Information in the following applications sections is not part of the TI component
specification, and TI does not warrant its accuracy or completeness. TI’s customers are
responsible for determining suitability of components for their purposes. Customers should
validate and test their design implementation to confirm system functionality.
9.1 Application Information
The SN74LV594A is a low drive CMOS device that can be used for a multitude of bus interface type applications
where output ringing is a concern. The low drive and slow edge rates will minimize overshoot and undershoot on
the outputs.
9.2 Typical Application
Figure 6. Typical Application Schematic
9.2.1 Design Requirements
This device uses CMOS technology and has balanced output drive. Take care to avoid bus contention because it
can drive currents that would exceed maximum limits. The high drive will also create fast edges into light loads
so consider routing and load conditions to prevent ringing.
Copyright © 2005–2015, Texas Instruments Incorporated
SN74LV594A
Submit Documentation Feedback
15