MSP430F2013-EP_16 Datasheet, PDF (15/54 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F2013-EP
www.ti.com
Electrical Characteristics
SLAS774A – JULY 2011 – REVISED OCTOBER 2011
Active Mode Supply Current Into V_CC Excluding External Current
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)⁽¹⁾⁽²⁾
PARAMETER
I_AM,1MHz
Active mode (AM)
current (1 MHz)
TEST CONDITIONS
f_DCO = f_MCLK = f_SMCLK = 1 MHz,
f_ACLK = 32768 Hz,
Program executes in flash,
BCSCTL1 = CALBC1_1MHZ,
DCOCTL = CALDCO_1MHZ,
CPUOFF = 0, SCG0 = 0,
SCG1 = 0, OSCOFF = 0
T_A
V_CC
MIN TYP
2.2 V
220
3V
310
I_AM,1MHz
Active mode (AM)
current (1 MHz)
f_DCO = f_MCLK = f_SMCLK = 1 MHz,
f_ACLK = 32768 Hz,
Program executes in RAM,
BCSCTL1 = CALBC1_1MHZ,
DCOCTL = CALDCO_1MHZ,
CPUOFF = 0, SCG0 = 0,
SCG1 = 0, OSCOFF = 0
2.2 V
190
3V
265
f_MCLK = f_SMCLK = f_ACLK = 32768 Hz/8 -40°C to 85°C
2.2 V
1.2
= 4096 Hz,
f_DCO = 0 Hz,
125°C
2.2 V
I_AM,4kHz
Active mode (AM)
current (4 kHz)
Program executes in flash,
SELMx = 11, SELS = 1,
-40°C to 85°C
3V
1.6
DIVMx = DIVSx = DIVAx = 11,
CPUOFF = 0, SCG0 = 1,
125°C
3V
SCG1 = 0, OSCOFF = 0
f_MCLK = f_SMCLK = f_{DCO(0, 0)} ≈ 100 kHz, -40°C to 85°C
2.2 V
37
I_AM,100kHz
Active mode (AM)
current (100 kHz)
f_ACLK = 0 Hz,
Program executes in flash,
RSELx = 0, DCOx = 0,
125°C
-40°C to 85°C
2.2 V
3V
40
CPUOFF = 0, SCG0 = 0,
SCG1 = 0, OSCOFF = 1
125°C
3V
(1) All inputs are tied to 0 V or to V_CC. Outputs do not source or sink any current.
(2) External crystal not used. The currents are characterized with a clock derived from alternate external clock source.
Typical Characteristics - Active Mode Supply Current (Into V_CC)
ACTIVE MODE CURRENT
vs
ACTIVE MODE CURRENT
V_CC
(T_A = 25°C)
vs
DCO FREQUENCY
5.0
4.0
MAX UNIT
280
µA
380
µA
3
6
4 _µA
7
50
65
55 ^µA
70
4.0
f_DCO = 16 MHz
3.0
f_DCO = 12 MHz
2.0
1.0
0.0
1.5
f_DCO = 8 MHz
f_DCO = 1 MHz
2.0
2.5
3.0
3.5
4.0
V_CC − Supply Voltage − V
Figure 3.
Copyright © 2011, Texas Instruments Incorporated
3.0
T_A = 85°C
T_A = 25°C
2.0
1.0 ^{VCC = 3 V}
T_A = 85°C
T_A = 25°C
V_CC = 2.2 V
0.0
0.0
4.0
8.0
12.0
16.0
f_DCO − DCO Frequency − MHz
Figure 4.
Submit Documentation Feedback
15