OPA2211-HT Datasheet, PDF (14/21 Pages) Texas Instruments – 1.1 nV/Hz Noise, Low Power, Precision Operational Amplifier

OPA2211-HT
SBOS684A – AUGUST 2013 – REVISED AUGUST 2013
www.ti.com
APPLICATION INFORMATION
The OPA2211 is a unity-gain stable, precision op
amp with very low noise. Applications with noisy or
high-impedance power supplies require decoupling
capacitors close to the device pins. In most cases,
0.1μF capacitors are adequate. Figure 40 shows a
simplified schematic of the OPA2211. This die uses a
SiGe bipolar process and contains 180 transistors.
OPERATING VOLTAGE
OPA2211 series op amps operate from ±2.25V to
±18V supplies while maintaining excellent
performance. The OPA2211 series can operate with
as little as +4.5V between the supplies and with up to
+36V between the supplies. However, some
applications do not require equal positive and
negative output voltage swing. With the OPA2211
series, power-supply voltages do not need to be
equal. For example, the positive supply could be set
to +25V with the negative supply at –5V or vice-
versa.
The common-mode voltage must be maintained
within the specified range. In addition, key
parameters are assured over the specified
temperature range, T_J = –55°C to +150°C.
Parameters that vary significantly with operating
voltage or temperature are shown in the Typical
Characteristics.
V+
Pre-Output Driver
IN-
IN+
OUT
V-
Figure 40. OPA2211 Simplified Schematic
14
Submit Documentation Feedback
Product Folder Links: OPA2211-HT
Copyright © 2013, Texas Instruments Incorporated