English
Language : 

CC2630 Datasheet, PDF (14/59 Pages) Texas Instruments – 6LoWPAN, ZigBee Wireless MCU
◁
CC2630
SWRS177B – FEBRUARY 2015 – REVISED JULY 2016
www.ti.com
5.4 Power Consumption Summary
Measured on the TI CC2650EM-5XD reference design with Tc = 25°C, VDDS = 3.0 V with internal DC-DC converter, unless
otherwise noted.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
Reset. RESET_N pin asserted or VDDS below
Power-on-Reset threshold
Shutdown. No clocks running, no retention
100
nA
150
Standby. With RTC, CPU, RAM and (partial)
register retention. RCOSC_LF
1
Standby. With RTC, CPU, RAM and (partial)
register retention. XOSC_LF
1.2
Standby. With Cache, RTC, CPU, RAM and
(partial) register retention. RCOSC_LF
Icore
Core current consumption
Standby. With Cache, RTC, CPU, RAM and
(partial) register retention. XOSC_LF
2.5
µA
2.7
Idle. Supply Systems and RAM powered.
550
Active. Core running CoreMark
1.45 mA +
31 µA/MHz
Radio RX (1)
5.9
Radio RX(2)
Radio TX, 0-dBm output power(1)
6.1
mA
6.1
Radio TX, 5-dBm output power(2)
9.1
Peripheral Current Consumption (Adds to core current Icore for each peripheral unit activated)(3)
Peripheral power domain
Delta current with domain enabled
20
µA
Serial power domain
Delta current with domain enabled
13
µA
RF Core
Delta current with power domain enabled, clock
enabled, RF core idle
237
µA
µDMA
Iperi
Timers
I2C
Delta current with clock enabled, module idle
Delta current with clock enabled, module idle
Delta current with clock enabled, module idle
130
µA
113
µA
12
µA
I2S
Delta current with clock enabled, module idle
36
µA
SSI
Delta current with clock enabled, module idle
93
µA
UART
Delta current with clock enabled, module idle
164
µA
(1) Single-ended RF mode is optimized for size and power consumption. Measured on CC2650EM-4XS.
(2) Differential RF mode is optimized for RF performance. Measured on CC2650EM-5XD.
(3) Iperi is not supported in Standby or Shutdown.
5.5 General Characteristics
Measured on the TI CC2650EM-5XD reference design with Tc = 25°C, VDDS = 3.0 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
FLASH MEMORY
Supported flash erase cycles before
failure
100
Flash page/sector erase current
Average delta current
12.6
Flash page/sector size
4
Flash write current
Flash page/sector erase time(1)
Flash write time(1)
Average delta current, 4 bytes at a time
4 bytes at a time
8.15
8
8
(1) This number is dependent on Flash aging and will increase over time and erase cycles.
UNIT
k Cycles
mA
KB
mA
ms
µs
14
Specifications
Submit Documentation Feedback
Product Folder Links: CC2630
Copyright © 2015–2016, Texas Instruments Incorporated
 ▷