LM3S2918 Datasheet, PDF (113/684 Pages) Texas Instruments – Stellaris® LM3S2918 Microcontroller

Stellaris^® LM3S2918 Microcontroller
Register 11: Interrupt 32-43 Clear Pending (UNPEND1), offset 0x284
Note: This register can only be accessed from privileged mode.
The UNPEND1 register shows which interrupts are pending and removes the pending state from
interrupts. Bit 0 corresponds to Interrupt 32; bit 11 corresponds to Interrupt 43. See Table
2-9 on page 79 for interrupt assignments.
Interrupt 32-43 Clear Pending (UNPEND1)
Base 0xE000.E000
Offset 0x284
Type R/W, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
reserved
Type RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
Reset
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
15
Type RO
Reset
0
14
13
reserved
RO
RO
0
0
12
11
10
9
8
7
6
5
4
3
2
1
0
INT
RO
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit/Field
31:12
11:0
Name
reserved
INT
Type
RO
R/W
Reset Description
0x0000.0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0x000 Interrupt Clear Pending
Value Description
0 On a read, indicates that the interrupt is not pending.
On a write, no effect.
1 On a read, indicates that the interrupt is pending.
On a write, clears the corresponding INT[n] bit in the PEND1
register, so that interrupt [n] is no longer pending.
Setting a bit does not affect the active state of the corresponding
interrupt.
June 19, 2012
113
Texas Instruments-Production Data