TLC3702MDRG4 Datasheet, PDF (11/36 Pages) Texas Instruments – DUAL MICROPOWER LinCMOS VOLTAGE COMPARATORS

TLC3702
DUAL MICROPOWER LinCMOS™ VOLTAGE COMPARATORS
SLCS013E − NOVEMBER 1986 − REVISED MARCH 2012
PARAMETER MEASUREMENT INFORMATION
IC1a
1/4 TLC274CN
+
Buffer
−
R1
240 kΩ
C2
1 μF
R4
47 kΩ
V_DD
R5
1.8 kΩ 1%
−
DUT
+
R6
1 MΩ
R7
1.8 kΩ 1%
C3
0.68 μF
IC1c
1/4 TLC274CN
−
+
Integrator
V_IO
(X100)
C1
0.1 μF
IC1b
1/4 TLC274CN
−
+
Triangle
Generator
R3
100 Ω
R2
10 kΩ
C4
0.1 μF
R9
100 Ω 1%
R8
10 kΩ 1%
Figure 6. Circuit for Input Offset Voltage Measurement
Response time is defined as the interval between the application of an input step function and the instant when
the output reaches 50% of its maximum value. Response time for the low-to-high-level output is measured from
the leading edge of the input pulse, while response time for the high-to-low-level output is measured from the
trailing edge of the input pulse. Response time measurement at low input signal levels can be greatly affected
by the input offset voltage. The offset voltage should be balanced by the adjustment at the inverting input as
shown in Figure 7, so that the circuit is just at the transition point. A low signal, for example 105-mV or 5-mV
overdrive, causes the output to change state.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
11