CC1110F8RHHR Datasheet, PDF (11/249 Pages) Texas Instruments – Low-Power SoC (System-on-Chip) with MCU, Memory, Sub-1 GHz RF Transceiver, and USB Controller

CC1110Fx / CC1111Fx
Parameter
Active mode with
radio in TX,
433 MHz
Active mode with
radio in TX,
868, 915 MHz
Power mode 0
Power mode 1
Power mode 2
Power mode 3
Peripheral
Current
Consumption
Timer 1
Timer 2
Timer 3
Timer 4
ADC
Min Typ Max
33.5
20
19
36.2
21
20
4.3
220
0.5
0.3 1.0
Unit Condition
System clock running at 26 MHz or 24 MHz.
Digital regulator on. High speed crystal oscillator and low power
RCOSC running. Radio in TX mode
mA 10 dBm output power (PA_TABLE0=0xC0)
mA 0 dBm output power (PA_TABLE0=0x60)
mA −6 dBm output power (PA_TABLE0=0x2A)
System clock running at 26 MHz or 24 MHz.
Digital regulator on. High speed crystal oscillator and low power
RCOSC running. Radio in TX mode
mA 10 dBm output power (PA_TABLE0=0xC2). See Table 7 for typical
variation over operating conditions
mA 0 dBm output power (PA_TABLE0=0x50)
mA −6 dBm output power (PA_TABLE0=0x2B)
mA Same as active mode, but the CPU is not running (see 12.1.2.2 for
details). System clock at 26 MHz or 24 MHz
A Digital regulator on. HS RCOSC and high speed crystal oscillator off.
32.768 kHz XOSC or low power RCOSC running (see 12.1.2.3 for
details)
µA Digital regulator off. HS RCOSC and high speed crystal oscillator off.
Low power RCOSC running (see 12.1.2.4 for details)
µA Digital regulator off. No crystal oscillators or RC oscillators are
running (see 12.1.2.5 for details)
Add to the figures above if the peripheral unit is activated
2.7
A/MHz When running
1.3
A/MHz When running
1.6
A/MHz When running
2
A/MHz When running
1.2
mA During conversion
Table 6: Current Consumption
SWRS033H
Page 11 of 246