ADC10061_14 Datasheet, PDF (11/23 Pages) Texas Instruments – ADC10061/ADC10062/ADC10064 10-Bit 600 ns A/D Converter with Input Multiplexer and Sample

ADC10061, ADC10062, ADC10064
www.ti.com
SNAS069E – JUNE 1999 – REVISED MARCH 2013
Note that the sixteen comparators used in the first flash conversion are reused for the second flash. Thus, the
multistep conversion technique used in the ADC10061, ADC10062, and ADC10064 needs only a small fraction
of the number of comparators that would be required for a traditional flash converter, and far fewer than would be
used in a conventional half-flash approach. This allows the ADC10061, ADC10062, and ADC10064 to perform
high-speed conversions without excessive power drain.
Figure 20. Block Diagram of the Multistep Converter Architecture
SIMILAR PRODUCT DIFFERENCES
The ADC1006x, ADC1046x and ADC1066x (where "x" indicates the number of multiplexer inputs) are similar
devices with different specification limits. The differences in these device families are summarized below.
Device Family
ADC1006x
ADC1046x
ADC1066x
ILE, TUE, PSS
Ensured
-
-
THD, SNR, ENOB
-
Ensured
Ensured
Max. Conversion Time
900ns
900ns
466ns
Copyright © 1999–2013, Texas Instruments Incorporated
Submit Documentation Feedback
11
Product Folder Links: ADC10061 ADC10062 ADC10064