VSP5610 Datasheet, PDF (1/47 Pages) Texas Instruments – 16-Bit, 4-Channel, CCD/CMOS Sensor Analog Front-End with Timing Generator

www.ti.com
16-Bit, 4-Channel, CCD/CMOS Sensor
Analog Front-End with Timing Generator
Check for Samples: VSP5610, VSP5611, VSP5612
VSP5610
VSP5611
VSP5612
SBES021 – JUNE 2011
FEATURES
1
•23 Four-Channel CCD/CMOS Signal: 2-Channel,
3-Channel, and 4-Channel Selectable
• Power Supply: 3.3 V Only, Typ
(Built-in LDO, 3.3 V to 1.8 V)
• Maximum Conversion Rate:
– VSP5610: 35 MSPS
– VSP5611: 50 MSPS
– VSP5612: 70 MSPS
• 16-Bit Resolution
• CDS/SH Selectable
• Maximum Input Signal Range: 2.0 V
• Analog and Digital Hybrid Gain:
– Analog Gain: 0.5 V/V to 3.5 V/V in
3/64-V/V Steps
– Digital Gain: 1 V/V to 2 V/V in
1/256-V/V Steps
• Offset Correction DAC: ±250 mV, 8-Bit
• Standard LVDS/CMOS Selectable Output:
– LVDS:
– Data Channel: 2-Channel, 3-Channel
– Clock Channel: 1-Channel
– 8-Bit/7-Bit Serializer Selectable
– CMOS: 4 Bits × 4, 8 Bits × 2
• Timing Generator:
– Fast Transfer Clock: Eight Signals
– Slow Transfer Clock: Six Signals
• Timing Adjustment Resolution: t_MCLK/48
• Input Clamp/Input Reference Level
Internal/External Selectable
• Reference DAC: 0.5 V, 1.1 V, 1.5 V, 2 V
• SPI™: Three-Wire Serial
• GPIO: Four-Port
APPLICATIONS
• Copiers
• Facsimile Machines
• Scanners
DESCRIPTION
The
VSP5610/11/12
are
high-speed,
high-performance, 16-bit analog-to-digital-converters
(ADCs) that have four independent sampling circuit
channels for multi-output charge-coupled device
(CCD) and complementary metal oxide
semiconductor (CMOS) line sensors. Pixel data from
the sensor are sampled by the sample/hold (SH) or
correlated double sampler (CDS) circuit, and are then
converted to digital data by an ADC. Data output is
selectable in low-voltage differential signaling (LVDS)
or CMOS modes.
The VSP5610/11/12 include a programmable gain to
support the pixel level inflection caused by luminance.
The integrated digital-to-analog-converter (DAC) can
be used to adjust the offset level for the analog input
signal. Furthermore, the timing generator (TG) is
integrated in these devices for the control of sensor
operation.
The VSP5610/11/12 use 1.65 V to 1.95 V for the core
voltage and 3.0 V to 3.6 V for I/Os. The core voltage
is supplied by a built-in low-dropout regulator (LDO).
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
SPI is a trademark of Motorola.
2
All other trademarks are the property of their respective owners.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated