UCC5310_17 Datasheet, PDF (1/47 Pages) Texas Instruments – 3-kVRMS Single-Channel Isolated Gate Drivers

Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
UCC5310, UCC5320, UCC5350, UCC5390
SLLSER8B – JUNE 2017 – REVISED AUGUST 2017
UCC53x0 3-kV_RMS Single-Channel Isolated Gate Drivers
1 Features
•1 3-V to 15-V Input Supply Voltage
• 13.2-V to 33-V Output Driver Supply Voltage
• Feature Options
– Split Outputs (UCC5320S and UCC5390S)
– UVLO With Respect to IGBT Emitter
(UCC5320E and UCC5390E)
– Miller Clamp Option (UCC5310M and
UCC5350M)
• Negative 5-V Handling Capability on Input Pins
• 60-ns (Typical) Propagation Delay for UCC5320S,
UCC5320E, and UCC5310M
• 65-ns (Typical) Propagation Delay for UCC5390S,
UCC5390E, and UCC5350M
• 100-kV/μs Minimum Common-Mode Transient
Immunity (CMTI)
• Isolation Surge Withstand Voltage: 4242 V_PK
• Safety-Related Certifications:
– 4242-V_PK Isolation per DIN V VDE V 0884-10
and DIN EN 61010-1 (Planned)
– 3000-V_RMS Isolation for 1 Minute per UL 1577
(Planned)
– CSA Component Acceptance Notice 5A, IEC
60950-1 and IEC 61010-1 End Equipment
Standards (Planned)
– CQC Certification per GB4943.1-2011
(Planned)
• 4-kV ESD on All Pins
• CMOS Inputs
• 8-pin Narrow Body SOIC Package
• Operating Temperature: –40°C to +125°C
Ambient
The UCC53x0 is available in an 8-pin SOIC (D)
package. This package has a creepage and
clearance of 4 mm and can support isolation voltage
up to 3 kV_RMS, which is good for applications where
basic isolation is needed. With these various options
and wide power range, the UCC53x0 family is a good
fit for motor drives and industrial power supplies.
The UCC53x0S option provides a split output that
can be used to control the rise and fall times of the
driver. The UCC53x0M option connects the gate of
the transistor to an internal clamp to prevent false
turnon caused by Miller current. The UCC53x0E
option has its UVLO2 referenced to GND2, which
facilitates bipolar supplies.
Unlike an optocoupler, the UCC53x0 family has lower
part-to-part skew, lower propagation delay, higher
operating temperature, and higher CMTI.
PART
NUMBER
UCC5310M
UCC5320S
UCC5320E
UCC5350M
UCC5390S
UCC5390E
Device Information⁽¹⁾
MINIMUM
SOURCE AND DESCRIPTION
SINK CURRENT
2.4 A and 1.1 A Miller clamp
2.4 A and 2.2 A Split output
2.4 A and 2.2 A
UVLO with respect to IGBT
emitter
5 A and 5 A
Miller clamp
10 A and 10 A Split output
10 A and 10 A
UVLO with respect to IGBT
emitter
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
(2) For a detailed comparison of devices, see the
Device Comparison Table
Functional Block Diagram (S Version)
5 V _VCC1
VCC2 ^{15 V}
2 Applications
VCC2
• Industrial Motor-Control Drives
• Industrial Power Supplies
• Solar Inverters
• HEV and EV Power Modules
• Induction Heating
UVLO,
IN+
UVLO
and
Level
Shift
Input
texatnd
Logic
Control
Logic
IN±
VOUTH
VOUTL
Rest of
Circuit
3 Description
GND1
The UCC53x0 is a family of compact, single-channel,
isolated IGBT, SiC, and MOSFET gate drivers with
superior isolation ratings and variants for pinout
configuration, and drive strength.
VEE2
Copyright © 2017, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.