TUSB9261-Q1 Datasheet, PDF (1/24 Pages) Texas Instruments – USB 3.0 TO SATA BRIDGE

www.ti.com
TUSB9261-Q1
SLLSEE2A – JANUARY 2014 – REVISED JANUARY 2014
USB 3.0 TO SATA BRIDGE
Check for Samples: TUSB9261-Q1
FEATURES
1
• Qualified for Automotive Applications
• AEC-Q100 Qualified with the Following
Exceptions:
– Device CDM ESD Classification Level C3
• Ideal for bridging Serial ATA (SATA) Devices,
Such as Hard Disk Drives (HDD), Solid State
Drives (SSD), or Optical Drives (OD) to
Universal Serial Bus (USB)
• USB Interface
– Integrated Transceiver Supports SS/HS/FS
Signaling
– Best in Class Adaptive Equalizer
– Allows for Greater Jitter Tolerance in the
Receiver
– USB Class Support
– USB Attached SCSI Protocol (UASP) for
HDD and SSD
– USB Mass Storage Class Bulk-Only
Transport (BOT) Including Support for
Error Conditions Per the 13 Cases
(Defined in the BOT Specification)
– USB Bootability Support
– USB Human Interface Device (HID)
– Supports Firmware Update Via USB Using a
TI Provided Application
• SATA Interface
– Serial ATA Specification Revision 2.6
Supporting gen1 and gen2 Data Rates
– Supports hot plug
– Supports Mass-Storage Devices
Compatible with the ATA/ATAPI-8
Specification
• Integrated ARM Cortex M3 Core
– Customizable Application Code Loaded
From EEPROM Via SPI Interface
– Two Additional SPI Port Chip Selects for
Peripheral Connection
– Up to 5 GPIOs for End-User Configuration
via HID
– Serial Communications Interface for Debug
(UART)
• General Features
– Integrated Spread Spectrum Clock
Generation Enables Operation from a
Single Low Cost Crystal or Clock Oscillator
– Supports 20, 25, 30 or 40 MHz
– JTAG Interface for IEEE1149.1 and
IEEE1149.6 Boundary Scan
– Available in a Fully RoHS Compliant
Package (PAP)
APPLICATIONS
• Automotive
• External HDD/SSD
• External DVD
• HDD-Based Portable Media Player
Embedded
Host
TUSB8041-Q1
TUSB9261-Q1
HDD
(Media Drive)
Console
Convenience Port
Console
Convenience Port
Console
SD Reader
USB 2.0 Connection
USB 3.0 Connection
USB 3.0 Hub
USB 3.0 Port
USB 2.0 Device
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2014, Texas Instruments Incorporated