TUSB501-Q1 Datasheet, PDF (1/23 Pages) Texas Instruments – USB 3.0 Single-Channel Redriver with Equalization

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TUSB501-Q1
SLLSET3 – MAY 2016
TUSB501-Q1 USB 3.0 Single-Channel Redriver with Equalization
1 Features
•1 Q100 Automotive Qualified
• Aggressive Low-Power Architecture (Typical):
– 126 mW Active Power
– 20 mW in U2/U3
– 4 mW with No Connection
• Automatic LFPS DE Control
• Excellent Jitter and Loss Compensation
– 32 inches of FR4 4 mil Stripline
– 3 m of 30 AWG cable
• Integrated Termination
• Small 2 x 2 mm QFN Package
• Selectable Receiver Equalization, Transmitter De-
Emphasis and Output Swing
• Hot-Plug Capable
• ESD Protection ±5 kV HBM and 1500 V CDM
2 Applications
• Cell Phones
• Computers
• Docking Stations
• TVs
• Active Cables
• Backplanes
3 Description
The TUSB501-Q1 is a 3^rd generation 3.3-V USB 3.0
single-channel redriver. When 5 Gbps SuperSpeed
USB signals travel across a PCB or cable, signal
integrity degrades due to loss and inter-symbol
interference. The TUSB501-Q1 recovers incoming
data by applying equalization that compensates
channel loss, and drives out signals with a high
differential voltage. This extends the possible channel
length, and enables systems to pass USB 3.0
compliance. The TUSB501-Q1 advanced state
machine makes it transparent to hosts and devices.
After power up, the TUSB501-Q1 periodically
performs receiver detection on the TX pair. If it
detects a SuperSpeed USB receiver, RX termination
becomes enabled, and the TUSB501-Q1 is ready to
redrive.
The receiver equalizer has three gain settings that
are controlled by pin EQ: 3 dB, 6 dB, and 9 dB. This
should be set based on amount of loss before the
TUSB501-Q1. Likewise, the output driver supports
configuration of De-Emphasis and Output Swing (pins
DE and OS). These settings allow the TUSB501-Q1
to be flexibly placed in the SuperSpeed USB path,
with optimal performance.
Over previous generations, the TUSB501-Q1 features
reduced power in all link states, a stronger OS option,
improved receiver equalization settings, and an
intelligent LFPS Controller. This controller senses the
low frequency signals and automatically disables
driver de-emphasis, for full USB 3.0 compliance.
The TUSB501-Q1 is packaged in a small 2 x 2 mm
QFN, and operates through an industrial temperature
range of –40°C to 105°C.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TUSB501-Q1
WSON
2.00 mm x 2.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simple Application
USB Host
TUSB501-Q1
TUSB501-Q1
USB Connector
Copyright © 2016, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.