TUSB213 Datasheet, PDF (1/22 Pages) Texas Instruments – USB 2.0 High Speed Signal Conditioner

Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
TUSB213
SLLSEX6A – AUGUST 2017 – REVISED AUGUST 2017
TUSB213 USB 2.0 High Speed Signal Conditioner
1 Features
•1 Compatible with USB 2.0, OTG 2.0 and BC 1.2
• Pin strap or I²C Configurable
• Support for LS, FS, HS signaling
• Ultra-low USB Disconnect and Shutdown Power
Consumption
• Scalable solution - Daisy Chain Device for High
Loss Applications
• D1P/M and D2P/M Interchangeable and
Host/Device Agnostic
• Supports up to 5m pre-channel or 2m post-
channel Cable Length
– Four Selectable AC Boost Setting Via External
Pulldown Resistor
– DC Boost Along With AC Boost for Best Signal
Integrity
2 Applications
• Notebooks
• Desktops
• Docking Stations
• Tablets
• Cell Phones
• Active Cable, Cable Extenders
• Backplane
• Televisions
SPACER
SPACER
3 Description
The TUSB213 is a USB High-Speed (HS) signal
conditioner, designed to compensate for ISI signal
loss in a transmission channel which helps passing
USB electrical compliance tests.
TUSB213 has a patent-pending design which is
agnostic to USB Low Speed (LS) and Full Speed
(FS) signals. LS and FS signal characteristics are
unaffected by the TUSB213 while HS signals are
compensated.
Programmable signal AC boost and DC boost permits
fine tuning device performance to optimize High
Speed signals at the connector, this allows use in
many different applications.
In addition, TUSB213 is compatible with the USB On-
The-Go (OTG) and Battery Charging (BC) protocols.
Device Information ⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TUSB213
TUSB213I
VQFN (14)
3.50 mm x 3.50 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Simplified Schematic
5V
VCC
DP
USB Host
DM
Cable
D1P D2P
D1M D2M
GND
DP
USB
DM ^Connector
Copyright © 2017, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.