English
Language : 

TUSB212-Q1 Datasheet, PDF (1/27 Pages) Texas Instruments – USB 2.0 High Speed Signal Conditioner
Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
TUSB212-Q1
SLLSF35 – SEPTEMBER 2017
TUSB212-Q1 USB 2.0 High Speed Signal Conditioner
1 Features
•1 Qualified for Automotive Applications:
– Device Temperature Grade 2: –40°C to 105°C
Ambient Operating Temperature
– Device HBM Classification Level H1C
– Device CDM Classification Level C3
• Compatible with USB 2.0, OTG 2.0 and BC 1.2
• Pin strap or I2C configurable
• Support for LS, FS, HS signaling
• Ultra-low USB Disconnect and Shutdown Power
Consumption
• Selectable Signal Gain Via Daisy Chain Device for
High Loss Applications
• D1P/M and D2P/M Interchangeable and
Host/Device Agnostic
• Supports up to 5m pre-channel or 2m post-
channel Cable Length
– Four Selectable AC Boost Settings Via
External Pulldown Resistor
– DC Boost Along With AC Boost for Best Signal
Integrity
2 Applications
• Automotive Infotainment
• Notebooks
• Desktops
• Docking Stations
• Tablets
• Cell Phones
• Active Cable, Cable Extenders
• Backplane
• Televisions
3 Description
The TUSB212-Q1 is a USB High-Speed (HS) signal
conditioner, designed to compensate for ISI signal
loss in a transmission channel.
TUSB212-Q1 has a patent-pending design which is
agnostic to USB Low Speed (LS) and Full Speed
(FS) signals. LS and FS signal characteristics are
unaffected by the TUSB212-Q1 while HS signals are
compensated.
Programmable signal AC boost and DC boost permits
fine tuning device performance to optimize High
Speed signals at the connector. This helps to pass
USB High Speed electrical compliance tests.
In addition, TUSB212-Q1 is compatible with the USB
On-The-Go (OTG) and Battery Charging (BC)
protocols.
Device Information (1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TUSB212-Q1
X2QFN (12)
1.60 mm x 1.60 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
SPACER
Display
Simplified Schematic
3.3 V
VCC
USB Host
(Head Unit)
Cable
D2
D1
USB
Connector
GND
Copyright © 2017, Texas Instruments Incorporated
1
TUSB212-Q1
Copyright © 2017, Texas Instruments Incorporated
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.